1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor2860n-plus
    5. /
  5. 68
Page 336 / 794 Scroll up to view Page 331 - 335
Vigor2860 Series User’s Guide
322
Unmanaged Devices List
Any device (CPE) which follows the standard of TR-069 can
be configured and can be detected by Vigor2860 series
automatically.
Only eight remote devices can be managed by Vigor2860 at
one time. Therefore, other remote devices detected by
Vigor2860 series might not be displayed in such field.
Add
– Move the selected device from Unmanaged Devices
List to Managed Devices List.
IP Address
– Display the IP address of the remote device.
Mac Address
– Display the MAC address of the remote
device.
Device Model
– Display the model name of the remote device.
Description Name
– Define the name or type the additional
description of CPE for identification in VPN management and
CPE management.
Location
– Type the location (address) of the CPE to be
displayed by Google Map.
Refresh
Click it to refresh current web page.
Page 337 / 794
Vigor2860 Series User’s Guide
323
3.13.2.2 CPE Maintenance
This area displays all the profiles which are created for applying to the managed device. This
page can help the administrator to do maintenance jobs like firmware upgrade, configuration
backup, configuration restoration and etc.
Available settings are explained as follows:
Item
Description
Refresh
Click it to refresh current page.
USB Disk
- It means a USB disk connecting to
Vigor2860.
- It means no USB disk connecting to
Vigor2860.
Disk Usage
- When a USB disk connects
to Vigor2860, the disk usage and the disk capacity will be
displayed in such field.
- When there is no
USB disk connecting to Vigor2860, such message will be
displayed in this field.
Click the icon to see the content inside the USB disk.
Set to Factory Default
Click to clear all indexes.
Index
Display the number of the profile that you can edit.
Profile Name
Display the name of the maintenance profile.
Device Name
Display the name of the managed CPE that the maintenance
Page 338 / 794
Vigor2860 Series User’s Guide
324
profile will apply to.
Action
Display the action that managed CPE shall accept.
File/Path
Display the location of the file you want to save, restore or
upgrade for CPE.
Schedule
Display the schedule profiles selected for such profile.
Now
The action will be performed for the selected CPE
immediately.
How to add a new Maintenance Profile
Follow the steps below to create a new maintenance profile.
1.
Click any index number link, e.g., Index 1.
2.
The Maintenance dialog appears.
Available parameters are listed as follows:
Item
Description
Profile Name
Type the name of the maintenance profile.
Enable
Check it to enable such profile.
Device Name
The drop down list will display all the CPE devices detected
by Vigor2860 series. Choose the one which will be applied
with such new created profile.
Action Type
There are three actions for you to choose for such profile.
Config Backup
– It means such profile will be used for
configuration backup of the selected CPE.
Config Restore
– It means such profile will be used for
restoring the configuration of the selected CPE.
Note:
When restoring configuration to a CPE, make
sure the configuration file you selected was backup
from this CPE before. Because restoring from another
device's configuration file may cause serious problem
(e.g., Both devices have different ISP username/
Page 339 / 794
Vigor2860 Series User’s Guide
325
password. Restoring configuration from one CPE to the
other will cause Internet connection not being online).
Firmware Upgrade
– It means such profile will be
used for firmware upgrade.
File/Path
Click
Select
to locate the file you want to save, restore or
upgrade for CPE.
Index in Schedule
Vigor2860 series will perform the specified action to the
selected CPE based on the schedule configured here.
Specify one or two schedule profiles (represented by
number) here.
3.
Enter all the settings and click
OK
.
4.
A new maintenance profile has been created.
3.13.2.3 Google Map
To display the
location
of the managed CPE with a bird’s eye view, open
Central VPN
Management>>CPE Management
and click the tab of
Google Map
.
Page 340 / 794
Vigor2860 Series User’s Guide
326
3.13.3 VPN Management
An easy and quick method is offered to configure VPN settings for building VPN connection
automatically between Vigor2860 series (treated as VPN server) and other Vigor router
(treated as CPE device, i.e., VPN client).
Page without CPE connected
Page with CPE connected

Rate

4 / 5 based on 1 vote.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top