1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor2860n-plus
    5. /
  5. 69
Page 341 / 794 Scroll up to view Page 336 - 340
Vigor2860 Series User’s Guide
327
Available parameters are listed as follows:
Item
Description
VPN Management
Display Screen
Once the device is managed (controlled) by Vigor2860 series,
it will be displayed on such screen automatically. If not, refer
to sections
“4.14 How to manage the CPE (router) through
Vigor2860?”
for more detailed information.
PPTP
To build a quick VPN connection with PPTP, simply click the
managed CPE displayed on the Display Screen first and then
click such button. If the connection is built successfully,
related information will be displayed on CPE VPN Connection
List.
IPsec
To build a quick VPN connection with IPsec, simply click the
managed CPE displayed on the Display Screen first and then
click such button. If the connection is built successfully,
related information will be displayed on CPE VPN Connection
List.
Advanced
To build a VPN connection with detailed configuration (such
as PPP authentication and VJ compression), click
Advanced.
Specify the remote CPE from the Device drop down list; select
PPTP or IPsec as the Dial Type; choose PAP only or PAP or
CHAP as PPP authentication; enable (ON) or disable (OFF) VJ
Compression; then click
OK
to build the VPN connection
CPE VPN Connection List
VPN
Display the name of the LAN-to-LAN profile.
It is generated automatically when you click the
PPTP/IPsec/Advanced button to build the VPN connection
between Vigor2860 and remote CPE.
Type
Display the dial-in type and the authentication method.
Remote IP
Display the IP address of the remote CPE and the interface.
Virtual Network
Display the IP address and subnet mask of Vigor2860 series.
Tx Pkts
Display the number of the transmitted packets.
Tx Rate(Bps)
Display the number of the transmitted rate.
Rx Pkts
Display the number of the received packets.
Rx Rate(Bps)
Display the number of the received rate.
UP Time
Display the connection time of such VPN.
Page 342 / 794
Vigor2860 Series User’s Guide
328
3.13.4 Log & Alert
This page offers brief information to identify the CPE connected to Vigor2860 series.
Available settings are explained as follows:
Item
Description
Display Mode
Choose the mode you want to display the related information
on the following table.
Stop record when fulls –
when the capacity of CVM log
is full, the system will stop recording.
Always record the new event –
only the newest events
will be recorded by the system.
Device Name
Display the name of the managed CPE.
Description Name
Display the brief explanation for the managed CPE.
Time & date
Display the time and date that the managed CPE scanned by
Vigor2860 series.
Action Type
Display the action that Vigor2860 series will perform for the
managed CPE.
Message
Display the information for each event.
The Alert page offers brief information to identify the CPE connected to Vigor2860 series.
Page 343 / 794
Vigor2860 Series User’s Guide
329
3.14 Central AP Management
Vigor2860 can manage the access points supporting AP management via Central AP
Management.
3.14.1 Status
This page displays current status (online, offline or SSID hidden, IP address, encryption,
channel, version, password and etc.) of the access points managed by Vigor router. Please
open
Central AP Management>>Function Support List
to check what AP Models are
supported.
Available settings are explained as follows:
Item
Description
Index
Click the index number link for viewing the settings summary
of the access point.
Device Name
The name of the AP managed by Vigor router will be
displayed here.
IP Address
Display the true IP address of the access point.
SSID
Display the SSID configured for the access point(s) connected
to Vigor2860.
Encryption
Display the encryption mode used by the access point.
Ch.
Display the channel used by the access point.
WL Client
Display the number of wireless clients (stations) connecting to
the access point.
In which, 0/64 means that up to 64 clients are allowed to
connect to the access point. But, now no one connects to the
Page 344 / 794
Vigor2860 Series User’s Guide
330
access point.
The number displayed on the left side means 2.4GHz; and the
number displayed on the right side means 5GHz.
Version
Display the firmware version used by the access point.
Password
Vigor2860 can get related information of the access point by
accessing into the web user interface of the access point.
This button is used to modify the logging password of the
connected access point.
3.14.2 WLAN Profile
WLAN profile is used to apply to a selected access point. It is very convenient for the
administrator to configure the setting for access point without opening the web user interface
of the access point.
Check the box on the left side of the selected profile to modify the content of the profile. The
Clone
,
Edit
and
Apply To Device
buttons will be available then.
Available settings are explained as follows:
Item
Description
Profile
Display the name of the profile.
The default profile cannot be renamed.
Main SSID
Display the SSID configured by such wireless profile.
Security
Display the security mode selected by such wireless profile.
Multi-SSID
Enable means multiple SSIDs (more than one) are active.
Disable means only SSID1 is active.
Page 345 / 794
Vigor2860 Series User’s Guide
331
WLAN ACL
Display the name of the access control list.
Rate Control
Display the upload and/or download transmission rate.
Clone
It can copy settings from an existing WLAN profile to another
WLAN profile.
First, you have to check the box of the existing profile as the
original profile. Second, click
Clone
. The following dialog will
appear.
Third, choose the profile index to accept the settings from the
original profile. Forth, type a new name in the field of
Renamed as
. Last, click
Apply
to save the settings on this
dialog.
The new profile has been created with the settings coming
from the original profile.
Edit
It allows you to modify an existing wireless profile or create a
new wireless profile.
Apply to Device
Click it to apply the selected wireless profile to the specified
Access Point.
Simply choose the device you want from
Existing Device
field. Click
>>
to move the device to
Selected Device
field.
Then, click
OK
.
The selected WLAN profile will be applied to the selected
access point immediately. Later the access point will reboot.

Rate

4 / 5 based on 1 vote.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top