1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor-2710n
    5. /
  5. 16
Page 76 / 335 Scroll up to view Page 71 - 75
Vigor2710 Series User’s Guide
64
Regional
This page allows you to process incoming or outgoing phone calls by regional. Default
values (common used in most areas) will be shown on this web page. You
can change
the
number based on the region that the router is placed.
Last Call Return [Miss]
Sometimes, people might miss some phone calls. Please dial
number typed in this field to know where the last phone call
comes from and call back to that one.
Last Call Return [In]
You have finished an incoming phone call, however you want
to call back again for some reason. Please dial number typed in
this field to call back to that one.
Last Call Return [Out]
Dial the number typed in this field to call the previous
outgoing phone call again.
Call Forward [All][Act]
Dial the number typed in this field to forward all the incoming
calls to the specified place.
Call Forward [Deact]
Dial the number typed in this field to release the call forward
function.
Call Forward [Busy][Act]
Dial the number typed in this field to forward all the incoming
calls to the specified place while the phone is busy.
Call Forward [No
Ans][Act]
Dial the number typed in this field to forward all the incoming
calls to the specified place while there is no answer of the
connected phone.
Do Not Disturb [Act]
Dial the number typed in this field to invoke the function of
DND.
Do Not Distrub [Deact]
Dial the number typed in this field to release the DND
function.
Hide caller ID [Act]
Dial the number typed in this field to make your phone number
Page 77 / 335
Vigor2710 Series User’s Guide
65
(ID) not displayed on the display panel of remote end.
Hide caller ID [Deact]
Dial the number typed in this field to release this function.
Call Waiting [Act]
Dial the number typed in this field to make all the incoming
calls waiting for your answer.
Call Waiting [Deact]
Dial the number typed in this field to release this function.
Block Anonymous[Act]
Dial the number typed in this field to block all the incoming
calls with unknown ID.
Block Anonymous[Deact]
Dial the number typed in this field to release this function.
Block Unknown Domain
[Act]
Dial the number typed in this field to block all the incoming
calls from unknown domain.
Block Unknown Domain
[Deact]
Dial the number typed in this field to release this function.
Block IP Calls [Act]
Dial the number typed in this field to block all the incoming
calls from IP address.
Block IP Calls [Deact]
Dial the number typed in this field to release this function.
Block Last Calls [Act]
Dial the number typed in this field to block the last incoming
phone call.
PSTN Setup
Some emergency phone (e.g., 911) or special phone cannot be dialed out by using VoIP and
can be called out through PSTN line only. To solve this problem, this page allows you to set
five sets of PSTN number for dialing without passing through Internet. Please type the
number in the field of
phone number for
PSTN relay
.
Then, check the
Enable
box to make the PSTN number available for dial whenever you
need.
Note:
A Line port on the router allows connection to a PSTN line so the user can select
either the PSTN or VoIP for the calls, and can access the PSTN line during power
black-outs when VoIP is cut off (only available on port 2).
Page 78 / 335
Vigor2710 Series User’s Guide
66
3.5.2 SIP Accounts
In this section, you set up your own SIP settings. When you apply for an account, your SIP
service provider will give you an
Account Name
or user name,
SIP Registrar, Proxy,
and
Domain name
. (The last three might be the same in some case). Then you can tell your folks
your SIP Address as in
Account Name@ Domain name
As Vigor VoIP Router is turned on, it will first register with Registrar using
AuthorizationUser@Domain/Realm. After that, your call will be bypassed by SIP Proxy to
the destination using AccountName@Domain/Realm as identity.
SIP Accounts Web Page for Vigor2710 Vn -------
SIP Accounts Web Page for Vigor2710 VDn -------
Page 79 / 335
Vigor2710 Series User’s Guide
67
Index
Click this link to access into next page for setting SIP account.
Profile
Display the profile name of the account.
Domain/Realm
Display the domain name or IP address of the SIP registrar
server.
Proxy
Display the domain name or IP address of the SIP proxy
server.
Account Name
Display the account name of SIP address before @.
Codec
Display the selected Codec of this account.
Ring Port
Specify which port will ring when receiving a phone call.
Status
Show the status for the corresponding SIP account.
R
means
such account is registered on SIP server successfully.
–
means
the account is failed to register on SIP server.
STUN Server
Type in the IP address or domain of the STUN server.
External IP
Type in the gateway IP address.
SIP PING interval
The default value is 150 (sec). It is useful for a Nortel server
NAT Traversal Support.
Click the index link to open the following web page.
SIP Accounts Web Page for Vigor2710 Vn -------
Page 80 / 335
Vigor2710 Series User’s Guide
68
SIP Accounts Web Page for Vigor2710 VDn -------
Profile Name
Assign a name for this profile for identifying. You can type
similar name with the domain. For example, if the domain
name is
draytel.org
, then you might set
draytel-1
in this field.
Register via
If you want to make VoIP call without register personal
information, please choose
None
and check the box to achieve
the goal.
Some SIP server allows user to use VoIP function
without registering. For such server, please check the box of
Call without registration
. Choosing
Auto
is recommended.
SIP Port
Set the port number for sending/receiving SIP message for
building a session. The default value is
5060.
Your peer must
set the same value in his/her Registrar.
Domain/Realm
Set the domain name or IP address of the SIP Registrar server.
Proxy
Set domain name or IP address of SIP proxy server. By the
time you can type
:port
number
after the domain name to
specify that port as the destination of data transmission (e.g.,
nat.draytel.org:5065
)
Act as Outbound Proxy
Check this box to make the proxy acting as outbound proxy.

Rate

4.5 / 5 based on 2 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top