Page 71 / 335 Scroll up to view Page 66 - 70
Vigor2710 Series User’s Guide
59
the same SIP server, sometimes, the VoIP phone call
connection may not succeed. By using the specified dial out
account, the successful connection can be assured.
Loop through
The selection should be as the following:
Backup Phone Number
When the VoIP phone is obstructs or the Internet breaks down
for some reasons, the backup phone will be dialed out to
replace the VoIP phone number. At this time, the phone call
will be changed from VoIP phone into PSTN call according to
the loop through direction chosen. Note that, during the phone
switch, the blare of phone will appear for a short time. And
when the VoIP phone is switched into the PSTN phone, the
telecom co. might charge you for the connection fee. Please
type in backup phone number (PSTN) for this VoIP phone
setting.
Digit Map
For the convenience of user, this page allows users to edit prefix number for the SIP account
with adding number, stripping number or replacing number. It is used to help user having a
quick and easy way to dial out through VoIP interface.
Enable
Check this box to invoke this setting.
Match Prefix
The phone number set here is used to add, strip, or replace the
OP number.
Page 72 / 335
Vigor2710 Series User’s Guide
60
Mode
None
- No action.
Add
- When you choose this mode, the OP number will be
added with the prefix number for calling out through the
specific VoIP interface.
Strip
- When you choose this mode, the OP number will be
deleted by the prefix number for calling out through the
specific VoIP interface. Take the above picture (Prefix Table
Setup web page) as an example, the OP number of
886
will be
deleted completely for the prefix number is set with
886
.
Replace
- When you choose this mode, the OP number will be
replaced by the prefix number for calling out through the
specific VoIP interface. Take the above picture (Prefix Table
Setup web page) as an example, the prefix number of 03 will
replace 8863. For example: dial number of “88631111111”
will be changed to “031111111” and sent to SIP server.
OP Number
The front number you type here is the first part of the account
number that you want to execute special function (according to
the chosen mode) by using the prefix number.
Min Len
Set the minimal length of the dial number for applying the
prefix number settings. Take the above picture (Prefix Table
Setup web page) as an example, if the dial number is between
7 and 9, that number can apply the prefix number settings here.
Max Len
Set the maximum length of the dial number for applying the
prefix number settings.
Route
Choose the one that you want to enable the prefix number
settings from the saved SIP accounts. Please set up one SIP
account first to make this interface available.
Page 73 / 335
Vigor2710 Series User’s Guide
61
Call Barring
Call barring is used to block phone calls coming from the one that is not welcomed.
Click any index number to display the dial plan setup page.
Enable
Click this to enable this entry.
Call Direction
Determine the direction for the phone call, IN – incoming call,
OUT-outgoing call, IN & OUT – both incoming and outgoing
calls.
Barring Type
Determine the type of the VoIP phone call, URI/URL or
number.
Page 74 / 335
Vigor2710 Series User’s Guide
62
Specific URI/URL or
Specific Number
This field will be changed based on the type you selected for
barring Type.
Route
All
means all the phone calls will be blocked with such
mechanism.
Additionally, you can set advanced settings for call barring such as
Block Anonymous
,
Block Unknown Domain
or
Block IP Address
. Simply click the relational links to open the
web page.
For
Block Anonymous –
this function can block the incoming calls without caller ID on the
route (Phone port) specified in the following window.
Web Page for Vigor2710 Vn -------
Web Page for Vigor2710 VDn -------
For
Block Unknown Domain –
this function can block incoming calls (through Phone port)
from unrecognized domain that is not specified in SIP accounts.
Web Page for Vigor2710 Vn -------
Page 75 / 335
Vigor2710 Series User’s Guide
63
Web Page for Vigor2710 VDn -------
For
Block IP Address –
this function can block incoming calls (through Phone port) coming
from IP address.
Web Page for Vigor2710 Vn -------
Web Page for Vigor2710 VDn -------

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top