Page 111 / 241
Scroll up to view Page 106 - 110
Vigor2130 Series User’s Guide
103
4.
Click
Save
button, the configuration will download automatically to your computer as a
file named
config.cfg
.
The above example is using
Windows
platform for demonstrating examples. The
Mac
or
Linux
platform will appear different windows, but the backup function is still available.
Note:
Backup for Certification must be done independently. The Configuration Backup
does not include information of Certificate.
Restore Configuration
1.
Go to
System Maintenance
>>
Configuration Backup
. The following windows will be
popped-up, as shown below.
2.
Click
Browse
button to choose the correct configuration file for uploading to the router.
Click
Restore
button and wait for few seconds, the following picture will tell you that the
restoration procedure is successful.
Note:
If the file you want to restore has been encrypted, you will be asked to type the
encrypted key before clicking
Restore
.
Page 112 / 241
Vigor2130 Series User’s Guide
104
3.10.5 Syslog / Mail Alert
SysLog function is provided for users to monitor router. There is no bother to directly get into
the Web Configurator of the router or borrow debug equipments.
Enable (Syslog Access…)
Check the box to activate function of syslog.
Router Name
Type a name of this device.
Server IP Address
The IP address of the Syslog server.
Destination Port
Type a port for the Syslog protocol.
Log Level
Choose the severity level for the system log entry.
Enable (Mail Alert…)
Check the box to activate function of mail alert.
Send a test e-mail
Make a simple test for the e-mail address specified in this
page. Please assign the mail address first and click this
button to execute a test for verify the mail address is
available or not.
SMTP Server
The IP address of the SMTP server.
Mail To
Assign a mail address for sending mails out.
Mail From
Assign a path for receiving the mail from outside.
User Name
Type the user name for authentication.
Password
Type the password for authentication.
Enable E-mail Alert
Check the box of User Login to send alert message to the
e-mail box while the router detecting the item(s) you
specify here.
Page 113 / 241
Vigor2130 Series User’s Guide
105
Click
OK
to save these settings.
For viewing the Syslog, please do the following:
1.
Just set your monitor PC’s IP address in the field of Server IP Address
2.
Install the Router Tools in the
Utility
within provided CD. After installation, click on the
Router Tools>>Syslog
from program menu.
3.
From the Syslog screen, select the router you want to monitor. Be reminded that in
Network Information
, select the network adapter used to connect to the router.
Otherwise, you won’t succeed in retrieving information from the router.
Page 114 / 241
Vigor2130 Series User’s Guide
106
3.10.6 Time and Date
It allows you to specify where the time of the router should be inquired from.
Current System Time
Click
Inquire Time
to get the current time.
Time Zone
Select the time zone where the router is located.
Add NTP server
Click the button to add a new NTP server.
Delete
Click this button to remove an NTP server.
Click
OK
to save these settings.
Page 115 / 241
Vigor2130 Series User’s Guide
107
3.10.7 Management
This page allows you to manage the settings for access control, access list, port setup, and
SMP setup. For example, as to management access control, the port number is used to
send/receive SIP message for building a session. The default value is 5060 and this must
match with the peer Registrar when making VoIP calls.
Enable
HTTP/HTTPS/SSH/ICMP
Ping/FTP/TELNET
Enable the checkbox to allow system administrators to
login from the Internet. There are several servers
provided by the system to allow you managing the router
from Internet. Check the box(es) to specify.
Enable SNMP
Check it to enable such service.
Manager Host IP
– Set one host as the manager to
execute SNMP function. Type the IP address to specify
the certain host.
Access List
You could specify that the system administrator can only
login from a specific host or network defined in the list. A
maximum of three IPs/subnet masks is allowed.
List IP
- Indicate an IP address allowed to login to the
router.
Subnet Mask -
Represent a subnet mask allowed to login to
the router.
19216811.live