1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor-2130
    5. /
  5. 22
Page 106 / 241 Scroll up to view Page 101 - 105
Vigor2130 Series User’s Guide
98
Editing/Deleting User Settings
To edit a user, click the name link under Username to open the following page. Modify the
settings except Username and then click
OK
to save and exit it. If you want to remove such
user settings, simply click
Delete User
.
3.10 System Maintenance
For the system setup, there are several items that you have to know the way of configuration:
Status, TR-069, User Password, Configuration Backup, Syslog/Mail Alert, Time and Date,
Management, Reboot System and Firmware Upgrade.
Below shows the menu items for System Maintenance.
3.10.1 System Status
The
System Status
provides basic network settings of Vigor router. It includes LAN and
WAN interface information. Also, you could get the current running firmware version or
firmware related information from this presentation.
Page 107 / 241
Vigor2130 Series User’s Guide
99
Model Name
Display the model name of the router.
Firmware Version
Display the firmware version of the router.
Build Date/Time
Display the date and time of the current firmware build.
System Date
Display current time and date for the system server.
System Uptime
Display the connection time for the system server.
System-------
CPU Usage
Display the percentage of the CPU usage of your system.
Memory Usage
Display the size of the memory usage and the percentage.
LAN-------
MAC Address
Display the MAC address of the LAN Interface.
IP Address
Display the IP address of the LAN interface.
IP Mask
Display the subnet mask address of the LAN interface.
IPv6 Address (Global)
Display the global IPv6 address of the LAN interface.
IPv6 Address (Link)
Display the link local IPv6 address of the LAN interface.
DHCP Server
Display if the DHCP server is active or not.
WAN-------
Connection Mode
Display current connection type used.
Link Status
Display the connection status.
MAC Address
Display the MAC address of the WAN Interface.
IP Address
Display the IP address of the WAN interface.
IP Mask
Display the subnet mask address of the WAN interface.
IPv6 Address (Link)
Display the IPv6 address of the WAN interface.
Default Gateway
Display the gateway address of the WAN interface.
Primary DNS
Display the specified primary DNS setting.
Secondary DNS
Display the specified secondary DNS setting.
Wireless LAN-------
Page 108 / 241
Vigor2130 Series User’s Guide
100
MAC Address
Display the MAC address of the wireless LAN.
Device Type
Display the device type used for wireless LAN.
SSID
Display the SSID of the router.
Channel
Display the channel that wireless LAN used.
Manufacturer
Display the manufacturer of the disk.
Model
Display the model of the disk.
Size
Display the storage size of the USB diskette.
Status
Display current status of the USB diskette.
3.10.2 TR069
Vigor router with TR-069 is available for matching with VigorACS server. Such page
provides VigorACS and CPE settings under TR-069 protocol. All the settings configured here
is for CPE to be controlled and managed with VigorACS server. Users need to type URL,
username and password for the VigorACS server that such device will be connected. However
URL, username and password under CPE client are fixed that users cannot change it. The
default CPE username and password are "vigor" and "password". You will need it when you
configure VigorACS server.
ACS Settings
Such data must be typed according to the ACS (
Auto
Configuration Server) you want to link. Please refer
to VigorACS user’s manual for detailed information.
URL
- Type the URL for VigorACS server.
If the connected CPE needs to be authenticated, please
set URL as the following and type username and
password for VigorACS server:
http://{IP address of
VigorACS}:8080/ACSServer/services/ACSServlet
If the connected CPE does not need to be authenticated
Page 109 / 241
Vigor2130 Series User’s Guide
101
please set URL as the following:
http://{IP address of
VigorACS}:8080/ACSServer/services/UnAuthACSServ
let
Username/Password
- Type username and password for
ACS Server for authentication. For example, if you want
to use such CPE with VigorACS, you can type as the
following:
Username
: acs
Password
: password
CPE Settings
Such information is useful for Auto Configuration
Server.
Enable/Disable
– Allow/Deny the CPE Client to
connect with Auto Configuration Server.
Port
– Sometimes, port conflict might be occurred.
To solve such problem, you might change port
number for CPE.
Periodic Inform Settings
Disable –
The system will not send inform message to
ACS server.
Enable –
The system will send inform message to ACS
server periodically (with the time set in the box of
interval time).
The default setting is
Enable
. Please set interval time or
schedule time for the router to send notification to CPE.
Or click
Disable
to close the mechanism of notification.
3.10.3 User Password
This page allows you to set new password for user operation.
Old Password
Type in the old password. The factory default setting for
password is blank.
New Password
Type in new password in this filed.
Confirm New Password
Type in the new password again.
When you click
OK
, the login window will appear. Please use the new password to access
into the web configurator again.
Page 110 / 241
Vigor2130 Series User’s Guide
102
3.10.4 Configuration Backup
Backup the Configuration
Follow the steps below to backup your configuration.
1.
Go to
System
Maintenance
>>
Configuration Backup
. The following windows will be
popped-up, as shown below.
2.
Type a key arbitrarily for encrypting the file. Keep the key in mind. You will need it
whenever you want to restore such file. Click
Backup
button to get into the following
dialog. Click
Save
button to open another dialog for saving configuration as a file.
3.
In
Save As
dialog, the default filename is
config.cfg
. You could give it another name by
yourself.

Rate

4.3 / 5 based on 3 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top