Page 251 / 275
Scroll up to view Page 246 - 250
Vigor2110 Series User’s Guide
244
5.
Return to previous page. Enter the Name of Index Class 2 by clicking
Edit
link. In this
index, the user will set reserved bandwidth for
HTTPS
. And click
OK
.
6.
Click
Setup
link for WAN.
7.
Check
Enable UDP Bandwidth Control
on the bottom to prevent enormous UDP traffic
of VoIP influent other application. Click
OK
.
8.
If the worker has connected to the headquarter using host to host VPN tunnel. (Please
refer to Chapter 3 VPN for detail instruction), he may set up an index for it. Enter the
Class Name of Index 3. In this index, he will set reserved bandwidth for 1 VPN tunnel.
Page 252 / 275
Vigor2110 Series User’s Guide
245
9.
Click
Edit
to open the following window. Check the
ACT
box, first.
10.
Then click
Edit
of
Local Address
to set a worker’s subnet address. Click
Edit
of
Remote Address
to set headquarter’s IP address. Leave other fields and click
OK
.
5.4 LAN – Created by Using NAT
An example of default setting and the corresponding deployment are shown below. The
default Vigor router private IP address/Subnet Mask is
192.168.1.1/255.255.255.0. The built-in
DHCP server is enabled so it assigns every local NATed host an IP address of 192.168.1.x
Page 253 / 275
Vigor2110 Series User’s Guide
246
You can just set the settings wrapped inside the red rectangles to fit the request of NAT usage.
To use another DHCP server in the network rather than the built-in one of Vigor Router, you
have to change the settings as show below.
Page 254 / 275
Vigor2110 Series User’s Guide
247
You can just set the settings wrapped inside the red rectangles to fit the request of NAT usage.
Page 255 / 275
Vigor2110 Series User’s Guide
248
5.5 Calling Scenario for VoIP Function
5.5.1 Calling via SIP Sever
Example 1: Both John and David have SIP Addresses from different service providers.
Settings for John
DialPlan index 1
Phone Number: 1111
Display Name: David
SIP Accounts Settings ---
Profile Name: draytel1
Register via: Auto
SIP Port: 5060 (default)
Domain/Realm: draytel.org
Proxy: draytel.org
Act as outbound proxy:
unhecked
Display Name: John
Account Number/Name: 1234
Authentication ID: unchecked
Password: ****
Expiry Time: (use default value)
CODEC/RTP/DTMF ---
(Use default value)
John calls David ---
He picks up the phone and dials 1111#. (DialPlan
Phone Number for David)
Settings for David
DialPlan index 1
Phone Number:2222
Display Name: John
SIP Accounts Settings ---
Profile Name: iptel 1
Register via: Auto
SIP Port: 5060(default)
Domain/Realm: iptel.org
Proxy: iptel.org
Act as outbound proxy:
unchecked
Display Name: David
Account Name: 4321
Authentication ID: unchecked
Password: ****
Expiry Time: (use default value)
CODEC/RTP/DTMF ---
(Use default value)
David calls John
He picks up the phone and dials 2222# (DialPlan
Phone Number for John)
19216811.live