1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor-2110
    5. /
  5. 46
Page 226 / 275 Scroll up to view Page 221 - 225
Vigor2110 Series User’s Guide
219
Enable syslog message
Check the box listed on this web page to send the
corresponding message of firewall, VPN, User Access,
Call, WAN, Router/DSL information to Syslog.
Enable (Alert Setup…)
Check “
Enable
” to activate function of mail alert.
Send a test e-mail
Make a simple test for the e-mail address specified in this
page. Please assign the mail address first and click this
button to execute a test for verify the mail address is
available or not.
SMTP Server
The IP address of the SMTP server.
Mail To
Assign a mail address for sending mails out.
Return-Path
Assign a path for receiving the mail from outside.
Authentication
Check this box to activate this function while using e-mail
application.
User Name
Type the user name for authentication.
Password
Type the password for authentication.
Enable E-mail Alert
Check the box to send alert message to the e-mail box
while the router detecting the item(s) you specify here.
Click
OK
to save these settings.
For viewing the Syslog, please do the following:
1.
Just set your monitor PC’s IP address in the field of Server IP Address
2.
Install the Router Tools in the
Utility
within provided CD. After installation, click on the
Router Tools>>Syslog
from program menu.
3.
From the Syslog screen, select the router you want to monitor. Be reminded that in
Network Information
, select the network adapter used to connect to the router.
Otherwise, you won’t succeed in retrieving information from the router.
Page 227 / 275
Vigor2110 Series User’s Guide
220
4.14.6 Time and Date
It allows you to specify where the time of the router should be inquired from.
Current System Time
Click
Inquire Time
to get the current time.
Use Browser Time
Select this option to use the browser time from the remote
administrator PC host as router’s system time.
Use Internet Time
Select to inquire time information from Time Server on the
Internet using assigned protocol.
Time Protocol
Select a time protocol.
Server IP Address
Type the IP address of the time server.
Time Zone
Select the time zone where the router is located.
Automatically Update Interval
Select a time interval for updating from the NTP server.
Click
OK
to save these settings.
Page 228 / 275
Vigor2110 Series User’s Guide
221
4.14.7 Management
This page allows you to manage the settings for access control, access list, port setup, and
SMP setup. For example, as to management access control, the port number is used to
send/receive SIP message for building a session. The default value is 5060 and this must
match with the peer Registrar when making VoIP calls.
Allow management from the
Internet
Enable the checkbox to allow system administrators to
login from the Internet. There are several servers
provided by the system to allow you managing the
router from Internet. Check the box(es) to specify.
Disable PING from the Internet
Check the checkbox to reject all PING packets from the
Internet. For security issue, this function is enabled by default.
Access List
You could specify that the system administrator can only
login from a specific host or network defined in the list. A
maximum of three IPs/subnet masks is allowed.
List IP
- Indicate an IP address allowed to login to the
router.
Subnet Mask -
Represent a subnet mask allowed to login to
the router.
Default Ports
Check to use standard port numbers for the Telnet and
HTTP servers.
User Defined Ports
Check to specify user-defined port numbers for the Telnet,
HTTP and FTP servers.
Enable SNMP Agent
Check it to enable this function.
Get Community
Set the name for getting community by typing a proper
character. The default setting is
public.
Page 229 / 275
Vigor2110 Series User’s Guide
222
Set Community
Set community by typing a proper name. The default
setting is
private.
Manager Host IP
Set one host as the manager to execute SNMP function.
Please type in IP address to specify certain host.
Trap Community
Set trap community by typing a proper name. The default
setting is
public.
Notification Host IP
Set the IP address of the host that will receive the trap
community.
Trap Timeout
The default setting is 10 seconds.
4.14.8 Reboot System
The Web Configurator may be used to restart your router. Click
Reboot System
from
System
Maintenance
to open the following page.
If you want to reboot the router using the current configuration, check
Using current
configuration
and click
OK
. To reset the router settings to default values, check
Using
factory default configuration
and click
OK
. The router will take 5 seconds to reboot the
system.
Note:
When the system pops up Reboot System web page after you configure web settings,
please click
OK
to reboot your router for ensuring normal operation and preventing unexpect
errors of the router in the future.
Page 230 / 275
Vigor2110 Series User’s Guide
223
4.14.9 Firmware Upgrade
Before upgrading your router firmware, you need to install the Router Tools. The
Firmware
Upgrade Utility
is included in the tools. The following web page will guide you to upgrade
firmware by using an example. Note that this example is running over Windows OS
(Operating System).
Download the newest firmware from DrayTek's web site or FTP site. The DrayTek web site is
www.draytek.com (or local DrayTek's web site) and FTP site is ftp.draytek.com.
Click
System Maintenance>> Firmware Upgrade
to launch the Firmware Upgrade Utility.
Click
OK
. The following screen will appear. Please execute the firmware upgrade utility first.
For the detailed information about firmware update, please go to Chapter 5.

Rate

4.7 / 5 based on 3 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top