Page 331 / 357
Scroll up to view Page 326 - 330
Vigor2830 Series User’s Guide
319
5.
For this index, the user will set reserved bandwidth (e.g., 25%) for
E-mail
using protocol
POP3 and SMTP.
6.
Return to previous page. Enter the Name of Index Class 2 by clicking
Edit
link. In this
index, the user will set reserved bandwidth for
HTTPS
. And click
OK
.
7.
Click
Setup
link for WAN2.
Page 332 / 357
Vigor2830 Series User’s Guide
320
8.
Check
Enable UDP Bandwidth Control
on the bottom to prevent enormous UDP traffic
of influent other application. Click
OK
.
9.
If the worker has connected to the headquarter using host to host VPN tunnel. (Please
refer to Chapter 3 VPN for detail instruction), he may set up an index for it. Enter the
Class Name of Index 3. In this index, he will set reserved bandwidth for 1 VPN tunnel.
10.
Click
Edit
to open a new window.
Page 333 / 357
Vigor2830 Series User’s Guide
321
11.
Click
Add
to open the following window. Check the
ACT
box, first.
12.
Then click
Edit
of
Local Address
to set a worker’s subnet address. Click
Edit
of
Remote Address
to set headquarter’s IP address. Leave other fields and click
OK
.
Page 334 / 357
Vigor2830 Series User’s Guide
322
5.4 Upgrade Firmware for Your Router
Using Firmware Upgrade Utility
Before upgrading your router firmware, you need to install the Router Tools. The
Firmware
Upgrade Utility
is included in the tools.
1.
Go to
www.DrayTek.com
.
2.
Access into
Support >> Downloads
. Please find out
Firmware
menu and click it. Search
the model you have and click on it to download the newly update firmware for your router.
3.
Access into
Support >> Downloads
. Please find out
Utility
menu and click it.
4.
Click on the link of
Router Tools
to download the file. After downloading the files,
please decompressed the file onto your host.
Page 335 / 357
Vigor2830 Series User’s Guide
323
5.
Double click on the icon of router tool. The setup wizard will appear.
6.
Follow the onscreen instructions to install the tool. Finally, click
Finish
to end the
installation.
7.
From the
Start
menu, open
Programs
and choose
Router Tools XXX
>>
Firmware
Upgrade Utility
.
8.
Type in your router IP, usually
192.168.1.1
.
9.
Click the button to the right side of Firmware file typing box. Locate the files that you
download from the company web sites. You will find out two files with different
extension names,
xxxx.all
(keep the old custom settings)
and
xxxx.rst
(reset all the
custom settings to default settings). Choose any one of them that you need.
19216811.live