Page 296 / 357 Scroll up to view Page 291 - 295
Vigor2830 Series User’s Guide
284
Old Password
Type in the old password. The factory default setting for
password is blank.
New Password
Type in new password in this field.
Confirm Password
Type in the new password again.
When you click
OK
, the login window will appear. Please use the new password to access
into the web configurator again.
4.15.5 Configuration Backup
Backup the Configuration
Follow the steps below to backup your configuration.
1.
Go to
System Maintenance
>>
Configuration Backup
. The following windows will be
popped-up, as shown below.
2.
Click
Backup
button to get into the following dialog. Click
Save
button to open another
dialog for saving configuration as a file.
Page 297 / 357
Vigor2830 Series User’s Guide
285
3.
In
Save As
dialog, the default filename is
config.cfg
. You could give it another name by
yourself.
4.
Click
Save
button, the configuration will download automatically to your computer as a
file named
config.cfg
.
The above example is using
Windows
platform for demonstrating examples. The
Mac
or
Linux
platform will appear different windows, but the backup function is still available.
Note:
Backup for Certification must be done independently. The Configuration Backup
does not include information of Certificate.
Restore Configuration
1.
Go to
System Maintenance
>>
Configuration Backup
. The following windows will be
popped-up, as shown below.
2.
Click
Browse
button to choose the correct configuration file for uploading to the router.
3.
Click
Restore
button and wait for few seconds, the following picture will tell you that
the restoration procedure is successful.
Page 298 / 357
Vigor2830 Series User’s Guide
286
4.15.6 Syslog/Mail Alert
SysLog function is provided for users to monitor router. There is no bother to directly get into
the Web Configurator of the router or borrow debug equipments.
SysLog Access Setup
Enable
- Check
Enable
to activate function of syslog.
Syslog Save to
– Check
Syslog Server
to save the log to
Syslog server.
Check
USB Disk
to save the log to the attached USB storage
disk.
Router Name
Display the name for such router configured in
System
Maintenance>>Management.
If there is no name here, simply lick the link to access into
System Maintenance>>Management
to set the router name.
Syslog Server IP
The IP address of the Syslog server.
Destination Port
Assign a port for the Syslog protocol.
Enable syslog message
Check the box listed on this web page to send the
corresponding message of firewall, VPN, User Access, Call,
WAN, Router/DSL information to Syslog.
AlertLog Setup
Check “
Enable
” to activate function of alert log.
Type the port number for alert log. The default setting is 514.
Mail Alert Setup
Check “
Enable
” to activate function of mail alert.
Send a test e-mail
Make a simple test for the e-mail address specified in this page.
Please assign the mail address first and click this button to
execute a test for verify the mail address is available or not.
SMTP Server
The IP address of the SMTP server.
Page 299 / 357
Vigor2830 Series User’s Guide
287
Mail To
Assign a mail address for sending mails out.
Return-Path
Assign a path for receiving the mail from outside.
Authentication
Check this box to activate this function while using e-mail
application.
User Name
Type the user name for authentication.
Password
Type the password for authentication.
Enable E-mail Alert
Check the box to send alert message to the e-mail box while the
router detecting the item(s) you specify here.
Click
OK
to save these settings.
For viewing the Syslog, please do the following:
1.
Just set your monitor PC’s IP address in the field of Server IP Address
2.
Install the Router Tools in the
Utility
within provided CD. After installation, click on the
Router Tools>>Syslog
from program menu.
3.
From the Syslog screen, select the router you want to monitor. Be reminded that in
Network Information
, select the network adapter used to connect to the router.
Otherwise, you won’t succeed in retrieving information from the router.
Page 300 / 357
Vigor2830 Series User’s Guide
288
4.15.7 Time and Date
It allows you to specify where the time of the router should be inquired from.
Current System Time
Click
Inquire Time
to get the current time.
Use Browser Time
Select this option to use the browser time from the remote
administrator PC host as router’s system time.
Use Internet Time
Select to inquire time information from Time Server on the
Internet using assigned protocol.
Time Protocol
Select a time protocol.
Server IP Address
Type the IP address of the time server.
Time Zone
Select the time zone where the router is located.
Enable Daylight Saving
Check the box to enable the daylight saving. Such feature is
available for certain area.
Automatically Update
Interval
Select a time interval for updating from the NTP server.
Click
OK
to save these settings.

Rate

4.7 / 5 based on 3 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top