1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor 2830
    5. /
  5. 59
Page 291 / 357 Scroll up to view Page 286 - 290
Vigor2830 Series User’s Guide
279
Free Capacity
It displays the free space of the USB storage disk. Click
Refresh
at any time to get new status for free capacity.
Index
It displays the number of the client which connecting to FTP
server.
IP Address
It displays the IP address of the user’s host which connecting to
the FTP server.
Username
It displays the username that user uses to login to the FTP
server.
When you insert USB storage disk into the Vigor router, the system will start to find out such
device within several seconds.
4.14.5 Syslog Explorer
Such page provides real-time syslog and displays the information on the screen.
For Web Syslog
Enable Web Syslog
Check this box to enable the function of Web Syslog.
Syslog Type
Use the drop down list to specify a type of Syslog to be
displayed.
Display Mode
There are two modes for you to choose.
Stop record when fulls –
when the capacity of syslog is full,
the system will stop recording.
Always record the new event –
only the newest events will be
recorded by the system.
Time
Display the time of the event occurred.
Message
Display the information for each event.
Page 292 / 357
Vigor2830 Series User’s Guide
280
For USB Syslog
This page displays the syslog recorded on the USB storage disk.
Time
Display the time of the event occurred.
Log Type
Display the type of the record.
Message
Display the information for each event.
4.15 System Maintenance
For the system setup, there are several items that you have to know the way of configuration:
Status, Administrator Password, Configuration Backup, Syslog, Time setup, Reboot System,
Firmware Upgrade.
Below shows the menu items for System Maintenance.
Page 293 / 357
Vigor2830 Series User’s Guide
281
4.15.1 System Status
The
System Status
provides basic network settings of Vigor router. It includes LAN and
WAN interface information. Also, you could get the current running firmware version or
firmware related information from this presentation.
Model Name
Display the model name of the router.
Firmware Version
Display the firmware version of the router.
Build Date/Time
Display the date and time of the current firmware built.
LAN-------
MAC Address
Display the MAC address of the LAN Interface.
IP Address
Display the IP address of the LAN interface.
Subnet Mask
Display the subnet mask address of the LAN interface.
DHCP Server
Display the current status of DHCP server of the LAN
interface.
DNS
Display the assigned IP address of the primary DNS.
Wireless LAN-------
MAC Address
Display the MAC address of the wireless LAN.
Frequency Domain
It can be Europe (13 usable channels), USA (11 usable
channels) etc. The available channels supported by the wireless
products in different countries are various.
Firmware Version
It indicates information about equipped WLAN miniPCi card.
This also helps to provide availability of some features that are
bound with some WLAN miniPCi.
SSID
Display the SSID of the router.
WAN-------
Link Status
Display current connection status.
MAC Address
Display the MAC address of the WAN Interface.
Page 294 / 357
Vigor2830 Series User’s Guide
282
Connection
Display the connection type.
IP Address
Display the IP address of the WAN interface.
Default Gateway
Display the assigned IP address of the default gateway.
4.15.2 TR-069
This device supports TR-069 standard. It is very convenient for an administrator to manage a
TR-069 device through an
Auto Configuration Server, e.g.,
VigorACS.
ACS Server On
Choose the interface for the router connecting to ACS server.
ACS Server
URL/Username/Password –
Such data must be typed
according to the ACS (Auto Configuration Server) you want to
link. Please refer to Auto Configuration Server user’s manual
for detailed information.
CPE Client
Such information is useful for Auto Configuration Server.
Enable/Disable
– Allow/Deny the CPE Client to connect with
Auto Configuration Server.
Port
– Sometimes, port conflict might be occurred. To solve
such problem, you might change port number for CPE.
Page 295 / 357
Vigor2830 Series User’s Guide
283
Periodic Inform Settings
The default setting is
Enable
. Please set interval time or
schedule time for the router to send notification to CPE. Or
click
Disable
to close the mechanism of notification.
STUN Settings
The default is
Disable
. If you click
Enable
, please type the
relational settings listed below:
Server IP –
Type the IP address of the STUN server.
Server Port –
Type the port number of the STUN server.
Minimum Keep Alive Period –
If STUN is enabled, the CPE
must send binding request to the server for the purpose of
maintaining the binding in the Gateway. Please type a number
as the minimum period. The default setting is “60 seconds”.
Maximum Keep Alive Period –
If STUN is enabled, the CPE
must send binding request to the server for the purpose of
maintaining the binding in the Gateway. Please type a number
as the maximum period. A value of “-1” indicates that no
maximum period is specified.
4.15.3 Administrator Password
This page allows you to set new password.
Old Password
Type in the old password. The factory default setting for
password is
“admin”
.
New Password
Type in new password in this field.
Confirm Password
Type in the new password again.
When you click
OK
, the login window will appear. Please use the new password to access
into the web configurator again.
4.15.4 User Password
This page allows you to set new password for user operation.

Rate

4.7 / 5 based on 3 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top