1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor 2830
    5. /
  5. 11
Page 51 / 357 Scroll up to view Page 46 - 50
Vigor2830 Series User’s Guide
39
WAN/Backup Type
always (
Always On
) or be treated as a backup WAN interface
(
Backup WAN
).
Backup WAN/Backup Type –
Determine the role of such
WAN interface. It will be changed according to the
Active
Mode
specified.
If you choose
Always On
as
Active Mode
, you can choose one
of the backup WAN interfaces from the
Backup WAN
drop
down list. Later, when such WAN is disconnected for some
reason, the backup WAN will be activated automatically to
prevent data transmission from connection interrupted.
If you choose
Backup
as the
Active Mode
, Backup WAN will
be changed into
Backup Type
. You have to specify which role
the WAN interface should play if you want to backup multiple
WANs. However, ignore this setting if you want to backup a
single WAN.
When any WAN disconnect
– Such backup WAN will be
activated when any master WAN interface disconnects.
When all WAN disconnect
– Such backup WAN will be
activated only when all master WAN interfaces disconnect.
WAN3 with USB
To use 3G network connection through 3G USB Modem, please configure
WAN3
interface.
Page 52 / 357
Vigor2830 Series User’s Guide
40
Enable
Choose
Yes
to invoke the settings for this WAN interface.
Choose
No
to disable the settings for this WAN interface.
Display Name
Type the description for such WAN interface.
Physical Mode
Display the physical mode of such WAN interface.
Physical type
In such WAN interface, no type can be selected.
Line Speed
If your choose
According to Line Speed
as the
Load Balance
Mode
, please type the line speed for downloading and
uploading for such WAN interface. The unit is kbps.
Active Mode and Backup
WAN/Backup Type
Active Mode –
Determine the WAN interface will be active for
always(
Always On
) or be treated as a backup WAN
interface(
Backup WAN
).
Backup WAN/Backup Type –
Determine the role of such
WAN interface. It will be changed according to the
Active
Mode
specified.
If you choose
Always On
as
Active Mode
, you can choose one
of the backup WAN interfaces from the
Backup WAN
drop
down list. Later, when such WAN is disconnected for some
reason, the backup WAN will be activated automatically to
prevent data transmission from connection interrupted.
If you choose
Backup
as the
Active Mode
, Backup WAN will
be changed into
Backup Type
. You have to specify which role
the WAN interface should play if you want to backup multiple
WANs. However, ignore this setting if you want to backup a
single WAN.
Page 53 / 357
Vigor2830 Series User’s Guide
41
When any WAN disconnect
– Such backup WAN will be
activated when any master WAN interface disconnects.
When all WAN disconnect
– Such backup WAN will be
activated only when all master WAN interfaces disconnect.
3.1.3 Internet Access
For the router supports multi-WAN function, the users can set different WAN settings (for
WAN1/WAN2/WAN3) for Internet Access. Due to different Physical Mode for WAN
interface, the Access Mode for these connections also varies. Refer to the following figures.
Index
Display the WAN interface.
Display Name
It shows the name of the WAN1/WAN2/WAN3 that entered in
general setup.
Physical Mode
It shows the physical connection for WAN1(ADSL)/WAN2
Page 54 / 357
Vigor2830 Series User’s Guide
42
(Ethernet) /WAN3 (3G USB Modem) according to the real
network connection.
Access Mode
Use the drop down list to choose a proper access mode. The
details page of that mode will be popped up. If not, click
Details Page for accessing the page to configure the settings.
Details Page
This button will open different web page according to the
access mode that you choose in WAN interface
Details Page for PPPoE/PPPoA in WAN1
PPPoA, included in RFC1483, can be operated in either Logical Link Control-Subnetwork
Access Protocol or VC-Mux mode. As a CPE device, Vigor router encapsulates the PPP
session based for transport across the ADSL loop and your ISP’s Digital Subscriber Line
Access Multiplexer (DSLAM).
To choose PPPoE or PPPoA as the accessing protocol of the internet, please select
PPPoE/PPPoA
from the
Internet Access
menu. The following web page will be shown.
Enable/Disable
Click
Enable
for activating this function. If you click
Disable
,
this function will be closed and all the settings that you adjusted
in this page will be invalid.
DSL Modem Settings
Set up the DSL parameters required by your ISP. These are
vital for building DSL connection to your ISP.
Multi-PVC channel -
The selections displayed here are
determined by the page of
Internet Access
–
Multi PVCs
.
Select M-PVCs Channel
means no selection will be chosen.
VPI
- Type in the value provided by ISP.
Page 55 / 357
Vigor2830 Series User’s Guide
43
VCI
- Type in the value provided by ISP.
Encapsulating Type
- Drop down the list to choose the type
provided by ISP.
Protocol
- Drop down the list to choose the one provided by
ISP.If you have already used
Quick Start Wizard
to set the
protocol, then it is not necessary for you to change any settings
in this group.
Modulation
– Drop down the list to choose a proper
modulation for the router.
PPPoE Pass-through
The router offers PPPoE dial-up connection. Besides, you also
can establish the PPPoE connection directly from local clients
to your ISP via the Vigor router. When PPPoA protocol is
selected, the PPPoE package transmitted by PC will be
transformed into PPPoA package and sent to WAN server.
Thus, the PC can access Internet through such direction.
For Wired LAN
– If you check this box, PCs on the same
network can use another set of PPPoE session (different with
the Host PC) to access into Internet.
For Wireless LAN
– If you check this box, PCs on the same
wireless network can use another set of PPPoE session
(different with the Host PC) to access into Internet.
WAN Connection
Detection
Such function allows you to verify whether network connection
is alive or not through ARP Detect or Ping Detect.
Mode
– Choose
ARP Detect
or
Ping Detect
for the system to
execute for WAN detection.
Ping IP
– If you choose Ping Detect as detection mode, you
have to type IP address in this field for pinging.
TTL (Time to Live)
– Displays value for your reference. TTL
value is set by telnet command.
ISP Access Setup
Enter your allocated username, password and authentication
parameters according to the information provided by your ISP.
If you want to connect to Internet all the time, you can check
Always On
.
Username
– Type in the username provided by ISP in this
field.
Password
– Type in the password provided by ISP in this field.
PPP Authentication
– Select
PAP only
or
PAP or CHAP
for
PPP.
Idle Timeout
– Set the timeout for breaking down the Internet
after passing through the time without any action. This setting
is active only when the
Active on demand
option for Active
Mode is selected in
WAN>> General Setup
page.
IP Address From ISP
Usually ISP dynamically assigns IP address to you each time
you connect to it and request. In some case, your ISP provides
service to always assign you the same IP address whenever you
request. In this case, you can fill in this IP address in the Fixed
IP field. Please contact your ISP before you want to use this
function.

Rate

4.7 / 5 based on 3 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top