1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor 2830
    5. /
  5. 13
Page 61 / 357 Scroll up to view Page 56 - 60
Vigor2830 Series User’s Guide
49
Details Page for Static or Dynamic IP in WAN2
For static IP mode, you usually receive a fixed public IP address or a public subnet, namely
multiple public IP addresses from your DSL or Cable ISP service providers. In most cases, a
Cable service provider will offer a fixed public IP, while a DSL service provider will offer a
public subnet. If you have a public subnet, you could assign an IP address or many IP address
to the WAN interface.
To use
Static or Dynamic IP
as the accessing protocol of the internet, please click the
Static
or Dynamic IP
tab. The following web page will be shown.
Enable / Disable
Click
Enable
for activating this function. If you click
Disable
,
this function will be closed and all the settings that you adjusted
in this page will be invalid.
Keep WAN Connection
Normally, this function is designed for Dynamic IP environments
because some ISPs will drop connections if there is no traffic
within certain periods of time. Check
Enable PING to keep alive
box to activate this function.
PING to the IP
- If you enable the PING function, please specify
the IP address for the system to PING it for keeping alive.
PING Interval
- Enter the interval for the system to execute the
PING operation.
WAN Connection
Detection
Such function allows you to verify whether network connection is
alive or not through ARP Detect or Ping Detect.
Mode
– Choose
ARP Detect
or
Ping Detect
for the system to
execute for WAN detection.
Page 62 / 357
Vigor2830 Series User’s Guide
50
Ping IP
– If you choose Ping Detect as detection mode, you have
to type IP address in this field for pinging.
TTL (Time to Live)
– Displays value for your reference. TTL
value is set by telnet command.
RIP Protocol
Routing Information Protocol is abbreviated as RIP
（
RFC1058
）
specifying how routers exchange routing tables information. Click
Enable RIP
for activating this function.
WAN IP Network
Settings
This group allows you to obtain an IP address automatically and
allows you type in IP address manually.
WAN IP Alias
- If you have multiple public IP addresses and
would like to utilize them on the WAN interface, please use
WAN IP Alias. You can set up to 8 public IP addresses other than
the current one you are using.
Obtain an IP address automatically
– Click this button to
obtain the IP address automatically if you want to use
Dynamic
IP
mode.
Router Name
:
Type in the router name provided by ISP.
Domain Name
:
Type in the domain name that you have assigned.
Specify an IP address
– Click this radio button to specify some
data if you want to use
Static IP
mode.
IP Address
:
Type the IP address.
Subnet Mask
:
Type the subnet mask.
Gateway IP Address
:
Type the gateway IP address.
Default MAC Address
: Click this radio button to use default
MAC address for the router.
Specify a MAC Address
: Some Cable service providers specify a
specific MAC address for access authentication. In such cases you
need to click the
Specify a MAC Address
and enter the MAC
address in the MAC Address field.
Page 63 / 357
Vigor2830 Series User’s Guide
51
DNS Server IP Address
Type in the primary IP address for the router if you want to use
Static IP
mode. If necessary, type in secondary IP address for
necessity in the future.
After finishing all the settings here, please click
OK
to activate them.
Details Page for PPTP/L2TP in WAN2
To use
PPTP/L2TP
as the accessing protocol of the internet, please click the
PPTP/L2TP
tab.
The following web page will be shown.
PPTP/L2TP Client Mode
Enable PPTP-
Click this radio button to
enable a PPTP client
to establish a tunnel to a DSL modem on the WAN interface.
Enable L2TP
- Click this radio button to
enable a L2TP client
to establish a tunnel to a DSL modem on the WAN interface.
Disable
– Click this radio button to close the connection
through PPTP or L2TP.
Server Address
- Specify the IP address of the PPTP/L2TP
server if you enable PPTP/L2TP client mode.
Specify Gateway IP Address
– Specify the gateway IP
address for DHCP server.
ISP Access Setup
Username
-Type in the username provided by ISP in this
field.
Password
-Type in the password provided by ISP in this field.
PPP Setup
PPP Authentication
- Select
PAP only
or
PAP or CHAP
for
PPP.
Idle Timeout
- Set the timeout for breaking down the Internet
after passing through the time without any action.
IP Address Assignment
Method(IPCP)
WAN IP Alias
- If you have multiple public IP addresses and
would like to utilize them on the WAN interface, please use
WAN IP Alias. You can set up to 8 public IP addresses other
Page 64 / 357
Vigor2830 Series User’s Guide
52
than the current one you are using.
Fixed IP
- Usually ISP dynamically assigns IP address to you
each time you connect to it and request. In some case, your
ISP provides service to always assign you the same IP address
whenever you request. In this case, you can fill in this IP
address in the Fixed IP field. Please contact your ISP before
you want to use this function. Click
Yes
to use this function
and type in a fixed IP address in the box.
Fixed IP Address -
Type a fixed IP address.
WAN IP Network
Settings
Obtain an IP address automatically
– Click this button to
obtain the IP address automatically.
Specify an IP address
– Click this radio button to specify
some data.
IP Address
– Type the IP address.
Subnet Mask
– Type the subnet mask.
After finishing all the settings here, please click
OK
to activate them.
Page 65 / 357
Vigor2830 Series User’s Guide
53
Details Page for PPP in WAN3
To use
PPP
(for 3G USB Modem) as the accessing protocol of the internet, please choose
Internet Access
from
WAN
menu. Then, select
PPP
mode for WAN2. The following web
page will be shown.
Enable / Disable
Click
Enable
for activating this function. If you click
Disable
,
this function will be closed and all the settings that you adjusted
in this page will be invalid.
SIM PIN code
Type PIN code of the SIM card that will be used to access
Internet.
Modem Initial String
Such value is used to initialize USB modem. Please use the
default value. If you have any question, please contact to your
ISP.
APN Name
APN means Access Point Name which is provided and required
by some ISPs. Type the name and click Apply.
Modem Initial String2
The initial string 1 is shared with APN.
In some cases, users may need another initial
AT
command to
restrict 3G band or do any special settings.
Modem Dial String
Such value is used to dial through USB mode. Please use the
default value. If you have any question, please contact to your
ISP.
PPP Username
Type the PPP username (optional).
PPP Password
Type the PPP password (optional).
WAN Connection
Detection
Such function allows you to verify whether network connection is
alive or not through ARP Detect or Ping Detect.
Mode
– Choose
ARP Detect
or
Ping Detect
for the system to

Rate

4.7 / 5 based on 3 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top