Page 41 / 78 Scroll up to view Page 36 - 40
41
D-Link WBR-2310 User Manual
Section 3 - Configuration
Dynamic Domain Name System is a method of
keeping a domain name linked to a changing IP
Address. Check the box to enable DDNS.
Choose your DDNS provider from the drop
down menu.
Enter the Host Name that you registered with
your DDNS service provider.
Enter the Username for your DDNS account.
Enter the Password for your DDNS account.
DDNS:
Server Address:
Host Name:
Username:
Password:
DDNS
Page 42 / 78
42
D-Link WBR-2310 User Manual
Section 3 - Configuration
VCT is an advanced feature that integrates a LAN cable
tester on every Ethernet port on the router. Through the
graphical user interface (GUI), VCT can be used to remotely
diagnose and report cable faults such as opens, shorts,
swaps, and impedance mismatch. This feature significantly
reduces service calls and returns by allowing users to easily
troubleshoot their cable connections.
The Ping Test is used to send Ping packets to test if a
computer is on the Internet. Enter the IP Address that you
wish to Ping, and click
Ping
.
Virtual Cable
Tester (VCT) Info:
System Test
Ping Test:
Page 43 / 78
43
D-Link WBR-2310 User Manual
Section 3 - Configuration
Enter a name for your new schedule.
Select a day, a range of days, or All Week to
include every day.
Check
All Day - 24hrs
or enter a start and end
time for your schedule.
Name:
Days:
Time:
Schedules
Page 44 / 78
44
D-Link WBR-2310 User Manual
Section 3 - Configuration
Log Settings
The Broadband Router keeps a running log of events and activities occurring on the Router. If the device is rebooted,
the logs are automatically cleared.
SMTP Server/IP
Address:
Email Address:
Save Log File to
Local Hard Drive:
Log Type:
The address of the SMTP server that will be
used to send the logs.
The email address to which the logs will be sent.
Click on
Send Mail Now
to send the email.
Click to save the log to your hard drive.
Check the type of alert you want logged.
Page 45 / 78
45
D-Link WBR-2310 User Manual
Section 3 - Configuration
This page displays the current information for the WBR-2310. It will display the LAN, WAN, and Wireless information.
If your WAN connection is set up for a Dynamic IP address then a
Release
button and a
Renew
button will be displayed.
Use
Release
to disconnect from your ISP and use
Renew
to connect to your ISP.
If your WAN connection is set up for PPPoE, a
Connect
button and a
Disconnect
button will be displayed. Use
Disconnect
to drop the PPPoE connection and use
Connect
to establish the PPPoE connection.
Displays the MAC address and the private
(local) IP settings for the router.
Displays the MAC address and the public IP
settings for the router.
Displays whether or not the status of the
JumpStart feature is enabled or disabled.
Displays the wireless MAC address and your
wireless settings such as SSID and Channel.
LAN:
WAN:
Wireless
JumpStart:
Wireless:
Device Information

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top