41

D-Link WBR-2310 User Manual

Section 3 - Configuration

Dynamic Domain Name System is a method of

keeping a domain name linked to a changing IP

Address. Check the box to enable DDNS.

Choose your DDNS provider from the drop

down menu.

Enter the Host Name that you registered with

your DDNS service provider.

Enter the Username for your DDNS account.

Enter the Password for your DDNS account.

DDNS:

Server Address:

Host Name:

Username:

Password:

DDNS

42

D-Link WBR-2310 User Manual

Section 3 - Configuration

VCT is an advanced feature that integrates a LAN cable

tester on every Ethernet port on the router. Through the

graphical user interface (GUI), VCT can be used to remotely

diagnose and report cable faults such as opens, shorts,

swaps, and impedance mismatch. This feature significantly

reduces service calls and returns by allowing users to easily

troubleshoot their cable connections.

The Ping Test is used to send Ping packets to test if a

computer is on the Internet. Enter the IP Address that you

wish to Ping, and click

Ping

.

Virtual Cable

Tester (VCT) Info:

System Test

Ping Test:

43

D-Link WBR-2310 User Manual

Section 3 - Configuration

Enter a name for your new schedule.

Select a day, a range of days, or All Week to

include every day.

Check

All Day - 24hrs

or enter a start and end

time for your schedule.

Name:

Days:

Time:

Schedules

44

D-Link WBR-2310 User Manual

Section 3 - Configuration

Log Settings

The Broadband Router keeps a running log of events and activities occurring on the Router. If the device is rebooted,

the logs are automatically cleared.

SMTP Server/IP

Address:

Email Address:

Save Log File to

Local Hard Drive:

Log Type:

The address of the SMTP server that will be

used to send the logs.

The email address to which the logs will be sent.

Click on

Send Mail Now

to send the email.

Click to save the log to your hard drive.

Check the type of alert you want logged.

45

D-Link WBR-2310 User Manual

Section 3 - Configuration

This page displays the current information for the WBR-2310. It will display the LAN, WAN, and Wireless information.

If your WAN connection is set up for a Dynamic IP address then a

Release

button and a

Renew

button will be displayed.

Use

Release

to disconnect from your ISP and use

Renew

to connect to your ISP.

If your WAN connection is set up for PPPoE, a

Connect

button and a

Disconnect

button will be displayed. Use

Disconnect

to drop the PPPoE connection and use

Connect

to establish the PPPoE connection.

Displays the MAC address and the private

(local) IP settings for the router.

Displays the MAC address and the public IP

settings for the router.

Displays whether or not the status of the

JumpStart feature is enabled or disabled.

Displays the wireless MAC address and your

wireless settings such as SSID and Channel.

LAN:

WAN:

Wireless

JumpStart:

Wireless:

Device Information