36

D-Link WBR-2310 User Manual

Section 3 - Configuration

To use the Universal Plug and Play (UPnP

™

)

feature click on

Enabled

. UPNP provides

compatibility with networking equipment, software

and peripherals.

Unchecking the box will not allow the WBR-2310

to respond to pings. Blocking the Ping may provide

some extra security from hackers. Check the box

to allow the WAN port to be “pinged”.

You may set the port speed of the WAN port to

10Mbps, 100Mbps, or auto. Some older cable

or DSL modems may require you to set the port

speed to 10Mbps.

Gaming mode allows a form of pass-through for

certain Internet Games. If you are using Xbox,

Playstation2 or a PC, make sure you are using the

latest firmware and Gaming Mode is enabled. To

utilize Gaming Mode, click the box. If you are not

using a Gaming application, it is recommended

that you Disable Gaming Mode.

Check the box to allow multicast traffic to pass

through the router from the Internet.

UPnP Settings:

WAN Ping:

WAN select to

10/100 Mbps:

Gaming Mode:

Multicast

streams:

Advanced Network Settings

37

D-Link WBR-2310 User Manual

Section 3 - Configuration

Enter a new Login Name for the Administrator

account.

Enter a new password for the Administrator Login

Name. The administrator can make changes to

the settings.

Enter a new Login Name for the User account.

Enter the new password for the User login. If you

login as the User, you can only see the settings,

but cannot change them.

Remote management allows the WBR-2310

to be configured from the Internet by a web

browser. A username and password is still

required to access the Web-Management

interface. In general, only a member of your

network can browse the built-in web pages to

perform Administrator tasks. This feature enables

you to perform Administrator tasks from the

remote (Internet) host.

The Internet IP address of the computer that has

access to the Broadband Router. If you input an

asterisk (*) into this field, then any computer will

be able to access the Router. Putting an asterisk (*) into this field would present a security risk and is not recommended.

The port number used to access the WBR-2310.

Example: http://x.x.x.x:8080 whereas x.x.x.x is the WAN IP address of the WBR-2310 and 8080 is the port used for the Web

Management interface.

Administrator

Login Name:

Administrator

Password:

User Login Name:

User Password:

Remote

Management:

IP Address:

Port:

Administrator Settings

This page will allow you to change the Administrator and User passwords. You can also enable Remote Management.

There are two accounts that can access the management interface through the web browser. The accounts are admin

and user. Admin has read/write access while user has read-only access. User can only view the settings but cannot

make any changes. Only the admin account has the ability to change both admin and user account passwords.

38

D-Link WBR-2310 User Manual

Section 3 - Configuration

Time Settings

Select the Time Zone from the drop-down

menu.

To select Daylight Saving time manually, select

enabled or disabled, and enter a start date and

an end date for daylight saving time.

NTP is short for Network Time Protocol. NTP

synchronizes computer clock times in a network

of computers. This field is optional.

To manually input the time, enter the values

in these fields for the Year, Month, Day, Hour,

Minute, and Second. Click Set Time. You can also

click Copy Your Computer’s Time Settings.

Time Zone:

Daylight Saving:

Automatic:

Manual:

39

D-Link WBR-2310 User Manual

Section 3 - Configuration

Use this option to save the current router

configuration settings to a file on the hard disk

of the computer you are using. First, click the

Save button. You will then see a file dialog,

where you can select a location and file name

for the settings.

Use this option to load previously saved

router configuration settings. First, use the

Browse control to find a previously save file

of configuration settings. Then, click the Load

button to transfer those settings to the router.

This option will restore all configuration settings

back to the settings that were in effect at the

time the router was shipped from the factory.

Any settings that have not been saved will be

lost, including any rules that you have created. If

you want to save the current router configuration

settings, use the Save button above.

Click Enabled to use the JumpStart function.

If your wireless router uses JumpStart, please

check the adapter for instructions.

Use this option to reset the JumpStart feature.

Save Settings to

Local Hard Drive:

Load Settings

from Local Hard

Drive:

Restore to Factory

Default Settings:

JumpStart

function:

Reset JumpStart:

System Settings

40

D-Link WBR-2310 User Manual

Section 3 - Configuration

Click on the link in this screen to find out if there

is an updated firmware; if so, download the new

firmware to your hard drive.

After you have downloaded the new firmware,

click Browse in this window to locate the

firmware update on your hard drive.

Click

Save

Settings

to complete the firmware upgrade.

Firmware

Upgrade:

Browse:

Update Firmware

You can upgrade the firmware of the Router here. Make sure the firmware you want to use is on the local hard drive of

the computer. Click on

Browse

to locate the firmware file to be used for the update. Please check the D-Link support

site for firmware updates at http://support.dlink.com. You can download firmware upgrades to your hard drive from the

D-Link support site.