• Safari 1.0 or higher (with Java 1.3.1 or higher)
• Flock 0.7.14 or higher
• Opera 6.0 or higher
Windows
®
Users:
Make sure you have the latest version of
Java installed. Visit
www.java.com
to download the latest
version.
System Requirements
Page 7 / 73
3
D-Link GO-RT-N150 User Manual
Section 1 - Product Overview
• Faster Wireless Networking
- The D-Link GO-RT-N150 provides up to 150Mbps* wireless connection with other
802.11n wireless clients. This capability allows users to participate in real-time activities online, such as video
streaming, online gaming, and real-time audio.
• Compatible with 802.11g Devices
- The D-Link GO-RT-N150 is still fully compatible with the IEEE 802.11g
standard, so it can connect with existing 802.11g PCI, USB and Cardbus adapters.
• Advanced Firewall Features
- The Web-based user interface displays a number of advanced network
management features including:
•
Content Filtering
- Easily applied content filtering based on URL, and/or Domain Name.
•
Secure Multiple/Concurrent Sessions
- The D-Link GO-RT-N150 can pass through VPN sessions. It
supports multiple and concurrent IPSec and PPTP sessions, so users behind the D-Link GO-RT-N150
can securely access corporate networks.
• Easy Setup Wizard
- Through its easy-to-use Web-based user interface, the D-Link GO-RT-N150 lets you control
what information is accessible to those on the wireless network, whether from the Internet or from your company’s
server. Configure your router to your specific settings within minutes.
* Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors,
including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely
affect wireless signal range.
Features
Page 8 / 73
4
D-Link GO-RT-N150 User Manual
Section 1 - Product Overview
Reset
Pressing the Reset button restores
the router to its original factory
default settings.
Hardware Overview
Connections
Power Receptor
Receptor for the supplied power
adapter.
Internet Port
The auto MDI/MDIX Internet port is
the connection for the Ethernet cable
to the cable or DSL modem.
LAN Ports (1-4)
Connect Ethernet devices such as
computers, switches, and hubs.
WPS Button
Pressing the WPS button
allows you to establish a secure
connection with a new device.
Page 9 / 73
5
D-Link GO-RT-N150 User Manual
Section 1 - Product Overview
Hardware Overview
LEDs
Power LED
A solid light indicates a
proper connection to the
power supply.
Internet LED
A solid light indicates
connection on the Internet
port.
Page 10 / 73
6
D-Link GO-RT-N150 User Manual
Section 2 - Installation
Before you Begin
This section will walk you through the installation process. Placement of the router is very important. Do not place the router
in an enclosed area such as a closet or cabinet, or in the attic or garage.
•
Please configure the router with the computer that was last directly connected to your modem.
•
You can only use the Ethernet port on your modem. If you were using the USB connection before using the
router, then you must turn off your modem, disconnect the USB cable and connect an Ethernet cable to the
Internet port on the router, and then turn the modem back on. In some cases, you may need to call your ISP to
change the connection type from USB to Ethernet.
•
If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as
WinPoet, Broadjump, or Enternet 300 from your computer or you will be unable to connect to the Internet.
19216811.live