26

D-Link EBR-2310 User Manual

Section 3 - Configuration

Select

Turn website filtering off

,

Turn website

filtering on and allow access

, or

Turn website

filtering on and deny access

.

Enter the keywords or URLs that you want to

block (or allow). Any URL with the keyword in it

will be blocked.

Configure Website

Filter:

Website URL/

Domain:

URL and domain blocking are used to deny LAN computers from accessing specific web sites by the URL or domain.

A URL is a specially formatted text string that defines a location on the Internet. If any part of the URL contains the

blocked word, the site will not be accessible and the web page will not display. To use this feature, enter the text string

to be blocked

and click

Save Settings

. The text to be blocked

will appear in the list. To delete the text, just highlight it

and click

Delete

to remove the text.

Website Filter

27

D-Link EBR-2310 User Manual

Section 3 - Configuration

Check this box to enable DMZ.

Enter the IP address of the computer you would

like to open all ports to.

Check this box to allow PPTP VPN traffic to pass

through the router to your VPN client.

Check this box to allow L2TP VPN traffic to pass

through the router to your VPN client.

Check this box to allow IPSec VPN traffic to pass

through the router to your VPN client.

Enable DMZ Host:

DMZ IP Address:

Enable PPTP

Passthrough:

Enable L2TP

Passthrough:

Enable IPSec

Passthrough:

Firewall Settings

This section will allow you to setup a DMZ host and to enable VPN passthrough.

If you have a client PC that cannot run Internet applications properly from behind the WBR-2310, then you can set

the client up for unrestricted Internet access. It allows a computer to be exposed to the Internet. This feature is useful

for gaming purposes. Enter the IP address of the internal computer that will be the DMZ host. Adding a client to the

DMZ (Demilitarized Zone) may expose your local network to a variety of security risks, so only use this option as a last

resort.

28

D-Link EBR-2310 User Manual

Section 3 - Configuration

To use the Universal Plug and Play (UPnP

™

)

feature click on

Enabled

. UPNP provides

compatibility with networking equipment,

software and peripherals.

Unchecking the box will not allow the WBR-

2310 to respond to pings. Blocking the Ping

may provide some extra security from hackers.

Check the box to allow the WAN port to be

“pinged”.

You may set the port speed of the WAN port to

10Mbps, 100Mbps, or auto. Some older cable

or DSL modems may require you to set the

port speed to 10Mbps.

Gaming mode allows a form of pass-through

for certain Internet Games. If you are using

Xbox, Playstation2 or a PC, make sure you are

using the latest firmware and Gaming Mode

is enabled. To utilize Gaming Mode, click the

box. If you are not using a Gaming application,

it is recommended that you Disable Gaming

Mode.

Check the box to allow multicast traffic to pass

through the router from the Internet.

UPnP Settings:

WAN Ping:

WAN select to

10/100 Mbps:

Gaming Mode:

Multicast

streams:

Advanced Network Settings

29

D-Link EBR-2310 User Manual

Section 3 - Configuration

Enter the new password for the Administrator

login. The administrator can make changes to

the settings.

Enter the new password for the User login. If you

login as the User, you can only see the settings,

but cannot change them.

Remote management allows the WBR-1310

to be configured from the Internet by a web

browser. A username and password is still

required to access the Web-Management

interface. In general, only a member of your

network can browse the built-in web pages to

perform Administrator tasks. This feature enables

you to perform Administrator tasks from the

remote (Internet) host.

The Internet IP address of the computer that has

access to the Broadband Router. If you input an

asterisk (*) into this field, then any computer will

be able to access the Router. Putting an asterisk

(*) into this field would present a security risk

and is not recommended.

The port number used to access the WBR-1310.

Example: http://x.x.x.x:8080 whereas x.x.x.x is the WAN IP address of the WBR-1310 and 8080 is the port used for the

Web-Management interface.

Administrator

Password:

User Password:

Remote

Management:

IP Address:

Port:

Administrator Settings

This page will allow you to change the Administrator and User passwords. You can also enable Remote Management.

There are two accounts that can access the management interface through the web browser. The accounts are admin

and user. Admin has read/write access while user has read-only access. User can only view the settings but cannot

make any changes. Only the admin account has the ability to change both admin and user account passwords.

30

D-Link EBR-2310 User Manual

Section 3 - Configuration

Time Settings

NTP is short for Network Time Protocol. NTP

synchronizes computer clock times in a network

of computers. This field is optional.

To manually input the time, enter the values

in these fields for the Year, Month, Day, Hour,

Minute, and Second. Click Set Time.

Select the Time Zone from the drop-down

menu.

To select Daylight Saving time manually, select

enabled or disabled, and enter a start date and

an end date for daylight saving time.

Automatic:

Manual:

Time Zone:

Daylight Saving: