Page 26 / 66 Scroll up to view Page 21 - 25
26
D-Link EBR-2310 User Manual
Section 3 - Configuration
Select
Turn website filtering off
,
Turn website
filtering on and allow access
, or
Turn website
filtering on and deny access
.
Enter the keywords or URLs that you want to
block (or allow). Any URL with the keyword in it
will be blocked.
Configure Website
Filter:
Website URL/
Domain:
URL and domain blocking are used to deny LAN computers from accessing specific web sites by the URL or domain.
A URL is a specially formatted text string that defines a location on the Internet. If any part of the URL contains the
blocked word, the site will not be accessible and the web page will not display. To use this feature, enter the text string
to be blocked
and click
Save Settings
. The text to be blocked
will appear in the list. To delete the text, just highlight it
and click
Delete
to remove the text.
Website Filter
Page 27 / 66
27
D-Link EBR-2310 User Manual
Section 3 - Configuration
Check this box to enable DMZ.
Enter the IP address of the computer you would
like to open all ports to.
Check this box to allow PPTP VPN traffic to pass
through the router to your VPN client.
Check this box to allow L2TP VPN traffic to pass
through the router to your VPN client.
Check this box to allow IPSec VPN traffic to pass
through the router to your VPN client.
Enable DMZ Host:
DMZ IP Address:
Enable PPTP
Passthrough:
Enable L2TP
Passthrough:
Enable IPSec
Passthrough:
Firewall Settings
This section will allow you to setup a DMZ host and to enable VPN passthrough.
If you have a client PC that cannot run Internet applications properly from behind the WBR-2310, then you can set
the client up for unrestricted Internet access. It allows a computer to be exposed to the Internet. This feature is useful
for gaming purposes. Enter the IP address of the internal computer that will be the DMZ host. Adding a client to the
DMZ (Demilitarized Zone) may expose your local network to a variety of security risks, so only use this option as a last
resort.
Page 28 / 66
28
D-Link EBR-2310 User Manual
Section 3 - Configuration
To use the Universal Plug and Play (UPnP
)
feature click on
Enabled
. UPNP provides
compatibility with networking equipment,
software and peripherals.
Unchecking the box will not allow the WBR-
2310 to respond to pings. Blocking the Ping
may provide some extra security from hackers.
Check the box to allow the WAN port to be
“pinged”.
You may set the port speed of the WAN port to
10Mbps, 100Mbps, or auto. Some older cable
or DSL modems may require you to set the
port speed to 10Mbps.
Gaming mode allows a form of pass-through
for certain Internet Games. If you are using
Xbox, Playstation2 or a PC, make sure you are
using the latest firmware and Gaming Mode
is enabled. To utilize Gaming Mode, click the
box. If you are not using a Gaming application,
it is recommended that you Disable Gaming
Mode.
Check the box to allow multicast traffic to pass
through the router from the Internet.
UPnP Settings:
WAN Ping:
WAN select to
10/100 Mbps:
Gaming Mode:
Multicast
streams:
Advanced Network Settings
Page 29 / 66
29
D-Link EBR-2310 User Manual
Section 3 - Configuration
Enter the new password for the Administrator
login. The administrator can make changes to
the settings.
Enter the new password for the User login. If you
login as the User, you can only see the settings,
but cannot change them.
Remote management allows the WBR-1310
to be configured from the Internet by a web
browser. A username and password is still
required to access the Web-Management
interface. In general, only a member of your
network can browse the built-in web pages to
perform Administrator tasks. This feature enables
you to perform Administrator tasks from the
remote (Internet) host.
The Internet IP address of the computer that has
access to the Broadband Router. If you input an
asterisk (*) into this field, then any computer will
be able to access the Router. Putting an asterisk
(*) into this field would present a security risk
and is not recommended.
The port number used to access the WBR-1310.
Example: http://x.x.x.x:8080 whereas x.x.x.x is the WAN IP address of the WBR-1310 and 8080 is the port used for the
Web-Management interface.
Administrator
Password:
User Password:
Remote
Management:
IP Address:
Port:
Administrator Settings
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management.
There are two accounts that can access the management interface through the web browser. The accounts are admin
and user. Admin has read/write access while user has read-only access. User can only view the settings but cannot
make any changes. Only the admin account has the ability to change both admin and user account passwords.
Page 30 / 66
30
D-Link EBR-2310 User Manual
Section 3 - Configuration
Time Settings
NTP is short for Network Time Protocol. NTP
synchronizes computer clock times in a network
of computers. This field is optional.
To manually input the time, enter the values
in these fields for the Year, Month, Day, Hour,
Minute, and Second. Click Set Time.
Select the Time Zone from the drop-down
menu.
To select Daylight Saving time manually, select
enabled or disabled, and enter a start date and
an end date for daylight saving time.
Automatic:
Manual:
Time Zone:
Daylight Saving:

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top