19216811.live11
D-Link EBR-2310 User Manual
Section 2 - Installation
Installation
Getting Started
Installation Location
The EBR-2310 can be positioned at any convenient place in your office or house. No special wiring or cooling requirements
are needed. However, you should comply with the following guidelines:
•
Place the EBR-2310 on a flat horizontal plane.
•
Keep away from any heating devices.
•
Do not place in a dusty or wet environment.
The recommended operational specifications of the EBR-2310 are:
Temperature
32o F ~ 131o F
Humidity
5 % ~ 90 %
In addition, remember to turn off the power, remove the power cord from the outlet, and keep your hands dry when
you install the hardware.
Network Settings
To use the EBR-2310 correctly, you have to properly configure the network settings of your computers. The default IP address
of the EBR-2310 is
192.168.0.1
, and the default subnet mask is
255.255.255.0
. These addresses can be changed as needed,
but the default values are used in this manual. If the TCP/IP environment of your computer has not yet been configured, you
can refer to
Configuring Your PCs to Connect to the EBR-2310
to configure it.
For example:
1.
Configure your computer
IP
as 192.168.0.3,
subnet mask
as 255.255.255.0 and
gateway
as 192.168.0.1
Or more conveniently
2.
Configure your computers to obtain TCP/IP settings automatically from the DHCP server feature of the EBR-2310
Since the IP address of the EBR-2310 is 192.168.0.1, the IP address of your computer must be 192.168.0.X (where “X” is a
number between 2 and 254.) Each computer on your network must have a different IP address within that range. The default
gateway must be 192.168.0.1 (the IP address of the EBR-2310).