19216811.live47
D-Link DWR-953 User Manual
Section 3 - Configuration
Enter a password that the admin account will use to access the
router’s management interface.
Confirm the chosen password.
Remote management allows the router to be configured from the
Internet using a web browser. A username and password is still
required to access the web-management interface. Usually only
a member of your network can browse the built-in web pages to
perform Administrator tasks. This feature enables you to perform
Administrator tasks from the remote (Internet) host.
Enter the Internet IP address of the PC that has access to the
broadband router. If you enter an asterisk (*) in this field, then
anyone will be able to access the router. Adding an asterisk (*) into
this field could present a security risk and is not recommended.
This is the port number used to access the router. Example: 8080 is
the port used for the web-management interface.
This enables you to connect to DWR-953 via Telnet.
Allow access via the Internet.
Specify the port that you wish to connect to.
New Password:
Confirm
Password:
Remote
Management:
IP Allowed to
Access:
Port:
Enable Telnet:
Allow WAN:
Port:
Administration
The
Administration
page allows you to change the Administrator password and enable Remote Management. The Administrator has read/write
access while the user has read-only access. Only the admin has the ability to change both admin and user account passwords.