Page 16 / 60
Scroll up to view Page 11 - 15
12
D-Link DWR-730 User Manual
Section 3 - Configuration
Internet Setup
If you want to enable Auto APN, tick the check box.
Enter the name of your ISP.
Enter a username.
Enter a password.
Enter the APN description.
Set to
Always On
,
On Demand
, or
Manual
.
Enter a maximum idle time in minutes.
Enter 0 to allow the connection to idle indefinitely.
Auto APN:
ISP:
Username:
Password:
APN:
Reconnect Mode:
Maximum Idle Time:
This section lets you manually enter the Internet connection information provided by your Internet Service Provider (ISP).
Page 17 / 60
13
D-Link DWR-730 User Manual
Section 3 - Configuration
Wireless Settings
If you want to configure the wireless settings on your
router using the wizard, click
Wireless Connection
Setup Wizard
.
If you want to manually configure the wireless settings
on your router click
Manual
Wireless Connection Setup
and refer to
Manual Wireless Setup
.
Click the
Wireless Connection Setup Wizard
button
to view the
Wireless Security Setup Wizard
menu. The
Welcome menu lists the steps used for setup. Click on
the
Next
button to continue.
Page 18 / 60
14
D-Link DWR-730 User Manual
Section 3 - Configuration
Enter the SSID (Service Set Identifier). The SSID is the
name of your wireless network. Create a name using up
to 20 characters. The SSID is case-sensitive.
It is recommended that you tick the checkbox to use WPA
wireless encryption to secure your wireless network.
Click
Next
to continue.
Type a password that you would like to use for your
wireless network in the
Network Key:
entry
field.
Click
Next
to continue.
Page 19 / 60
15
D-Link DWR-730 User Manual
Section 3 - Configuration
The final menu appears to indicate that setup is
complete.
You should write down the
Wireless Network Name
(SSID)
and
Network Key
for future reference when
connecting other wireless devices to your wireless
network.
Click
Save
to finish the Security Wizard.
Page 20 / 60
16
D-Link DWR-730 User Manual
Section 3 - Configuration
Manual Wireless Setup
Check box to enable wireless and enter Router
mode, uncheck to disable wireless and enter
Modem mode. In Modem mode, you will need to
use the Micro USB cable to connect the router to
your PC.
Enter a wireless network name.
Choose the wireless channel.
Choose the wireless security mode.
Enable Wireless :
Wireless Network Name:
Wireless Channel:
Security Mode:
Use this section to configure the wireless settings for your D-Link router.
19216811.live