7

D-Link DWR-730 User Manual

Section 2 - Installation

WiFi/WPS Configuration

±

Short press (1 second) the WiFi/WPS button to enable WPS. The WiFi/WPS LED

will flash for 2 minutes, allowing devices to connect. WPS will be disabled after

2 mintues.

±

Long press (5 seconds) the WiFi/WPS button to enable/disable WiFi. The WiFi/

WPS LED will change accordingly.

Note: When MicroSD card reader is enabled, WiFi will be disabled. You can only re-

enable this function through the WebGUI.

WiFi/WPS button

8

D-Link DWR-730 User Manual

Section 3 - Configuration

Web-Based Configuration Utility

You can use the web-based configuration utility to manage your wireless network. It allows you to set wireless encryption, control access to the

wireless network.

Note

: The web-based configuration utility and its associated features are for both Modem and Router modes.

To access the configuration utility, open a web-browser

such as Internet Explorer and enter the IP address of the

router (

192.168.0.1

by default).

Type

admin

in the

User Name

field and then enter your

password. Leave the password blank by default.

Click the

Log in

button to log in to the router.

If you get a

Page Cannot be Displayed

error, please refer

to the

Troubleshooting

section for assistance.

9

D-Link DWR-730 User Manual

Section 3 - Configuration

Internet Connection Setup Wizard

Once logged into the web interface of the router, the

Setup > Internet

page will appear. Click the

Internet Connection Setup

Wizard

button to quickly configure your router using the setup wizard.

If you want to enter your settings without running the wizard, click

Manual Internet Connection Setup

and skip to

Internet

Setup

.

10

D-Link DWR-730 User Manual

Section 3 - Configuration

Click

Next

to continue.

Create a new password and then click

Next

to continue.

Configure your 3G Internet Connection settings and

then click

Next

to continue.

11

D-Link DWR-730 User Manual

Section 3 - Configuration

Click

Connect

to save your settings. Once the router

has finished rebooting, click

Continue

. Please allow 1-2

minutes to connect.