Page 41 / 60
Scroll up to view Page 36 - 40
37
D-Link DWR-730 User Manual
Section 5 - Connecting to a Wireless Network
3.
Enter the same security key or passphrase that is on your router and click
Connect
.
It may take 20-30 seconds to connect to the wireless network. If the connection fails,
please verify that the security settings are correct. The key or passphrase must be
exactly the same as on the wireless router.
Page 42 / 60
38
D-Link DWR-730 User Manual
Section 5 - Connecting to a Wireless Network
Connect to a Wireless Network
Using Windows
®
XP
Windows
®
XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service Pack 2 users.
If you are
using another company’s utility or Windows
®
2000, please refer to the user manual of your wireless adapter for help with connecting to a wireless
network. Most utilities will have a “site survey” option similar to the Windows
®
XP utility as seen below.
Right-click on the wireless computer icon in your system tray (lower-right corner
next to the time). Select
View Available Wireless Networks
.
If you receive the
Wireless Networks Detected
bubble, click on the center of the
bubble to access the utility.
or
The utility will display any available wireless networks in your area. Click on a
network (displayed using the SSID) and click the
Connect
button.
If you get a good signal but cannot access the Internet, check the TCP/IP settings
for your wireless adapter. Refer to the
Networking Basics
section in this manual
for more information.
Page 43 / 60
39
D-Link DWR-730 User Manual
Section 5 - Connecting to a Wireless Network
Configure WEP
It is recommended to enable WEP on your wireless router or access point before configuring your wireless adapter. If you are joining an existing
network, you will need to know the WEP key being used.
2.
Highlight the wireless network (SSID) you would like to connect to
and click
Connect
.
1.
Open the Windows
®
XP Wireless Utility by right-clicking on
the wireless computer icon in your system tray (lower-right
corner of screen). Select
View Available Wireless Networks
.
Page 44 / 60
40
D-Link DWR-730 User Manual
Section 5 - Connecting to a Wireless Network
3.
The
Wireless Network Connection
box will appear. Enter the same WEP key that is
on your router and click
Connect
.
It may take 20-30 seconds to connect to the wireless network. If the connection fails,
please verify that the WEP settings are correct. The WEP key must be exactly the same
as on the wireless router.
Page 45 / 60
41
D-Link DWR-730 User Manual
Section 5 - Connecting to a Wireless Network
Configure WPA-PSK
2.
Highlight the wireless network (SSID) you would like to connect to and
click
Connect
.
1.
Open the Windows
®
XP Wireless Utility by right-clicking on the
wireless computer icon in your system tray (lower-right corner of
screen). Select
View Available Wireless Networks
.
It is recommended that you enable WPA on your wireless router or access point before configuring your wireless adapter. If you are joining an
existing network, you will need to know the WPA key being used.
19216811.live