6
Features
±
4 Different Operation modes -
Capable of operating in one of four different
operation modes to meet your wireless networking requirements: Access Point;
AP-to-AP Bridging; AP-to-Multipoint Bridging; or Repeater.
±
Easy Installation with PoE (Power over Ethernet).
±
Faster wireless networking
with the 802.11g standard to provide a maximum
wireless signal rate of up to 54Mbps* (maximum wireless signal rate of up to
108Mbps* in Super G mode).
±
Compatible with the 802.11b standard
to provide a wireless data rate of up
to 11Mbps - that means you can migrate your system to the 802.11g standard
on your own schedule without sacrificing connectivity.
±
Better security with WPA -
The DWL-2200AP can securely connect to
wireless clients on the network using WPA (Wi-Fi Protected Access) providing a
much higher level of security for your data and communications than has
previously been available.
±
AP Manager Setup Wizard -
The new Setup Wizard makes network
configuration quick and simple.
±
SNMP for Management -
The DWL-2200AP is not just fast but it also
supports SNMP v.3 for a better network management. Superior wireless AP
manager software is bundled with the DWL-2200AP for network configuration
and firmware upgrade. Systems administrators can also setup the DWL-2200AP
easily with the Web-based configuration. A D-Link D-View module will be
downloadable for network administration and real-time network traffic
monitoring with D-Link D-View software.
±
Utilizes
OFDM
technology (
O
rthogonal
F
requency
D
ivision
M
ultiplexing).
±
Operates in the 2.4GHz frequency range.
±
Web-based interface
for managing and configuring.
*Maximum wireless signal rate derived from IEEE Standard 802.11g specifications. Actual data throughput
will vary. Network conditions and environmental factors lower actual data throughput rate.
Downloaded from
www.Manualslib.com
manuals search engine