Page 61 / 80
Scroll up to view Page 56 - 60
61
*dhcp
service <Disable | Enable>
interface <1~2>
gateway <ip>
netmask <netmask>
ip range <ip> <number>
name server 1 <ip>
name server 2 <ip>
name server 3 <ip>
generic
fixed
add <mac> <ip>
delete
*snmp
community (5)
edit <Disable | Enable> <string> <Read_Only | Read_Write | Denied>
delete
trap (5)
edit <Disble | 1 | 2> <ip> <string>
delete
*tftp
<ip> <file>
*bridge
generic
<Disable | Enable> <ip> <netmask>
static
mac _ address <mac>
lan1_ port <Filter | Forward | Dynamic>
lan2 _ port <Filter | Forward | Dynamic>
wan 1 _ port <Filter | Forward | Dynamic>
wan 2 _ port <Filter | Forward | Dynamic>
add
delete (1~20)
Telnet Configuration (continued)
Page 62 / 80
62
modify (20)
mac _ address <mac>
lan1_ port <Filter | Forward | Dynamic>
lan2 _ port <Filter | Forward | Dynamic>
wan 1 _ port <Filter | Forward | Dynamic>
wan 2 _ port <Filter | Forward | Dynamic>
stp
module <Disable | Enable>
bridge <number>
lan _ port <1~2> <Disable | Enable> <number>
wan _ port <1~2> <Disable | Enable> <number>
activate _ stp
<CR>
WLAN
channel <1~14>
weprequired <Disable | Enable>
rts Threshold <0~3000>
frag Threshold <256^2346>
SSID <string>
station Name <string>
defaultkeyId <1~4>
defaultkeys <1~4> <hex>
Telnet Configuration (continued)
Page 63 / 80
63
*Show: Show the current configuration values
interface
PPP
ip _ share
dhcp
snmp
bridge
isp
run
*reset - default
write
reboot
su
sys info
Ping <ip> [1~65534| - t] [1~1999]
exit
configuration
max _
user <1~5>
telnet_port <1~65534>
console _
port <com 1 | com 2 >
user _
profile
add
attrib <13~30><command | Menu><VT100 | ANSI | LINUX | XTerm>
source <-1~10>
profile <name> <pass _ conf> <Level 1 | Level 2 | Level 3 | Unlimited>
delete (1~5)
attrib <13~30><command | Menu><VT100 | ANSI | LINUX | XTerm>
source <-1~10>
profile <name> <pass _ conf> <Level 1 | Level 2 | Level 3 | Unlimited>
legal - address
modify <1~10> <ip>
delete <1~10>
modify
attrib <13~30><command | Menu><VT100 | ANSI | LINUX | XTerm>
source <-1~10>
profile <name> <pass _ conf> <Level 1 | Level 2 | Level 3 | Unlimited>
Telnet Configuration (continued)
Page 64 / 80
64
Appendix 2:
Boot Code Firmware Upgrade
This procedure is optional. If you wish to upgrade the Boot Code, check the D-Link
support website to see if the Boot Code has been upgraded. If it has, and you wish to
upgrade it (optional), here is the procedure to upgrade the Boot Code, program
firmware and Web image by using the console port.
Command explanation:
DLSC
Erase the old configuration file
DLX
Upgrade Boot Code
DLS
Upgrade program image file
DLP
Upgrade Web image file
BE CAREFUL!!
If you failed in any command, please
DO NOT
“Power Off”
or
“Reboot”
the machine!! You must
RETRY
this command until it succeeds!
Procedure:
1.
Connect the
power supply
to the
Inline Power Injector
and the power outlet.
2.
Connect
MIL-C-5015 style Ethernet cable
into the
Special Ethernet port
of the
DWL-1750.
3.
Connect the
RJ-45 Ethernet connector
(another end of MIL-C-5015 style Ethernet
cable) into the
Power & Data Output Port
of the Inline Power Injector.
4.
Connect the
MIL-C-5015 style RS232 Console Port cable
into the PC COM port
and the DWL-1750 special serial port.
Use HyperTerminal to upgrade the software: Click
Start
and then select
Programs
>
Accessories
>
Communications
>
HyperTerminal
.
Page 65 / 80
65
After the Hyper
Terminal window
appears:
Give this new
connection a name.
(e.g., DWL-1750)
Boot Code Firmware Upgrade (continued)
Select correct
COM port.
(e.g.,COM1)
DWL-1750
DWL-1750
19216811.live