Page 56 / 80
Scroll up to view Page 51 - 55
56
Telnet Configuration (continued)
Enter the
User Name
and
User Password
as shown below. (The default
User
Name
is
user1
and the default
User Password
is
test.
)
2.
After you have logged in, the
Telnet user interface
screen will appear, as shown
below.
Page 57 / 80
57
3.
The structure of the menu tree is shown on the following page. Users can use the
following keys to select the parameter to change or add.
l
Up/Down or i/k key
: move the cursor up/down to the specific item.
l
Right or l or Enter key
: select the item or enter the sub-menu.
l
Left or j key
: return to previous menu page.
l
Home or Ctrl-A
: move the cursor to the first item of the menu page.
l
End or Ctrl-E
: move the cursor to the last item of the menu page.
l
Ctrl-Q or F1
: Show the help page.
Telnet Configuration (continued)
denotes that the function is displayed after
e
nable configuration mode
is
enabled.
In item
su
, type the default password
root
to enter
the supervisor configuration mode.
Hint 1: *
Hint 2:
Page 58 / 80
58
Su
Setup
System
Ian
Address <ip> <netmask>
Attrib <Enable | Disable> <Global | Virtual>
Bridge <Enable | Disable>
Wan
Address <ip> <netmask>
link - Type <Disable | Ethernet | PPP
>
Attrib <
| PPPoE
Enable | Disable> <Global | Virtual>
ether_interface <interface>
Bridge <Enable | Disable>
ISP <ISP Index> <idle disconnect time> <Dial priority>
ISP
*ISP_ profile <ISP name> <ISP destination>
*account - profile <Access account> <Passwd>
Configuration
<name> <pass_conf> <ip>
Upgrade
image
webimage
bootstrap 2
<ip> <file>
<ip> <file>
<ip> <file>
*Enable
Monitor
Wan
Config_access [Generic| Profile | Pool]
(CR)
Passwd <
pass_conf>
*System
OP _ mode <Router | Bridge | Host>
hostname <name>
default _ route <ip>
PPP
Peer_address <ip>
User_profile <name> <pass_set0>
Telnet Configuration (continued)
Page 59 / 80
59
*Interface
1
address <ip> <netmask>
link type <Disable | Ethernet>
attrib <Disable | Enable> <Global | Virtual>
bridge <Disable | Enable>
2
address <ip> <netmask>
link type <Disable | Ethernet>
attrib <Disable | Enable> <Global | Virtual>
bridge <Disable | Enable>
lan
wan
1
address <ip> <netmask>
link type <Disable | Ethernet | PPP | PPPoE>
attrib <Disable | Enable> <Global | Virtual>
bridge <Disable | Enable>
ether_interface <interface>
ISP <ISP Index> <dialup timeout> <Dial priority>
2
address <ip> <netmask>
link type <Disable | Ethernet | PPP | PPPoE>
attrib <Disable | Enable> <Global | Virtual>
bridge <Disable | Enable>
ISP <ISP Index> <Idle disconnect time> <Dial priority>
ether_interface <interface>
*PPP
User_edit
modify (5)
profile <name> <pass_set0>
delete
address_pool
ip_pool <ip> <1~127>
authenticate
<Userpool | RADIUS> <Userpool | RADIUS>
assign_address
<Address_Pool | RADIUS> <Address_Pool | RADIUS>
Telnet Configuration (continued)
Page 60 / 80
60
*IP _ share
add
protocol <TCPIUDP>
port <1~65534>
interface <1~2>
server <ip> <1~65534>
name <name>
pat
dalete
<1~10>
modify (10)
protocol <TCPIUDP>
port <1~65534>
interface <1~2>
server <ip> <1~65534>
name <name>
nat
local
range <1~5> <ip> <1~253>
delete <1~5>
global
range <1~5> <ip> <1~253>
interface <1~5> <1~5>
delete <1~5>
fixed
modify <1~128> <ip> <ip>
interface <1~128> <1~5>
delete <1~128>
*ISP
1
isp - profile (ISP name) (destination string)
account - profile (name) (pass - set 1)
2
isp - profile (ISP name) (destination string)
account - profile (name) (pass - set 1)
3
isp - profile (ISP name) (destination string)
account - profile (name) (pass - set 1)
4
isp - profile (ISP name) (destination string)
account - profile (name) (pass - set 1)
Telnet Configuration (continued)
19216811.live