Page 16 / 30
Scroll up to view Page 11 - 15
DVG-5102S
User’s Manual
MAINTENANCE
D-Link Systems, Inc.
16
Backup Configurations Template File
MAINTENANCE
→
Backup and Restore
Click the
Backup Settings
button to save your current settings to a template file for editing.
Update Settings
MAINTENANCE
→
Backup and Restore
To restore a system settings file, click on
Browse
to search the local hard drive for the file to be used.
Once you locate the file, click
Upload Settings
to overwrite the current settings with the settings saved
to the file.
Restore Default Settings
MAINTENANCE
→
Backup and Restore
Select
Restore Default Settings
to reset the VoIP TA
’
s settings back to the factory default settings.
Page 17 / 30
DVG-5102S
User’s Manual
MAINTENANCE
D-Link Systems, Inc.
17
2-2-3 Diagnostics
Use
“Ping”
to verify if a remote peer is reachable. Enter a remote IP address and click
“
Test
”
to ping the
remote host. The result would be shown on
Result
Table
MAINTENANCE
→
Diagnostics
Page 18 / 30
DVG-5102S
User’s Manual
STATUS
D-Link Systems, Inc.
18
2-3 STATUS
2-3-1 Device Info
STATUS
→
Device Info
For System Information, it shows Model Name, Time and Date and Firmware Version.
For WAN Port Information, it shows IP address, subnet mask, default gateway and DNS server. If you
use PPPoE to obtain IP, you will know if the IP is obtained through this method. If IP address, subnet
mask, default gateway is blank, it means that the VoIP TA does not obtain IP.
For LAN Port Information, it shows LAN port IP and the subnet mask.
Page 19 / 30
DVG-5102S
User’s Manual
STATUS
D-Link Systems, Inc.
19
STATUS
→
Device Info
For Hardware, it shows the hardware platform and driver version.
2-3-2 VoIP Status
STATUS
→
VoIP Status
For Port Status, it includes if each port registers to Proxy successfully, the last dialed number, how
many calls each port has made since the VoIP TA is start, etc.
For Server Registration Status, it shows the registration status of DDNS and STUN.
Page 20 / 30
DVG-5102S
User’s Manual
STATUS
D-Link Systems, Inc.
20
2-3-3 Statistics
STATUS
→
Statistics
Display the information of the last call made. Press
Refresh
button to get the latest RTP Packet
Summary.
2-3-4 Logout
If setting or parameter has been changed, remember to save the changes before you logout the
configuration menu.
Logout
19216811.live