Page 41 / 83
Scroll up to view Page 36 - 40
39
Figure 3.14: ToS
According to the RFC 1349 document, the TOS value as following:
1000 – minimize delay
0100 – maximize throughput
0010 – maximize reliability
0001 – minimize monetary cost
0000 – normal service
These values are the Binary format. Please change to the Decimal and put these
values in to the correct table.
3.13 Password Configuration
There are two-login accounts in this unit. One is the account root another is
administrator. The default setting for these two accounts are empty. Users could
define the passwords for these two accounts. Please get more info from the
following description. (see figure 3.15)
Page 42 / 83
40
Figure 3.15 Password Configuration
±
root – The password for the root account.
±
administrator – The password for the administrator account. This account
couldn’t upgrade the 2M and boot rom file.
±
Current Password – Enter the original password for the account.
±
New Password – Enter the new password for the account.
±
Confirm New Password – Enter the new password again.
±
Change – This button will make the configurations saved and next time login
will need the new password.
±
Abort – Abort the configuration of the password changing.
3.14 ROM Upgrade
User could update the firmware just by the web configuration interface. There are
two types for the upgrading procedure. One is using the TFTP server, another is
using the FTP server. Please follow the step to update the gateway firmware version.
(see figure 3.16)
Please remember the password you configure for the account. It will be more
difficult to access it if you forgot the password.
Page 43 / 83
41
Figure 3.16 ROM Upgrade
±
TFTP/FTP server IP Address – Put the ip address of the TFTP or FTP server in
this table.
±
Target File name – Put the target file name in this table.
±
Method – There are two upgrade methods for the upgrade procedure. One is
TFTP and another is FTP. Please change to correct method for the upgrading.
±
FTP Login – Please enter the login name and password for the FTP upgrade
method. This is necessary if user change the method to the FTP.
±
Target File Type – Please pick up the correct file type for upgrading. If the file
name and the file type is unconformable, the upgrade procedure will be failed.
±
OK – Press the OK button if all the info above are correct. The unit will start to
download the firmware file from the TFTP or FTP and write to the flash after the
downloading.
【
Updating the firmware by the FTP server
】
1
Pick up the “Rom Upgrade” button to enter the upgrading web page and switch
to the FTP method. (see figure 3.17)
Page 44 / 83
42
Figure 3.17 ROM Upgrade for FTP
2
Key in the IP address, the login name, password of your FTP server and the
correct file name, file type. (see figure 3.18)
Figure 3.18: FTP information
Please pay more attentions about the red blank. The Target File Type
has to be matched with the Target File name. Please put the correct info
about the Target file in this table.
Page 45 / 83
43
3
Press the OK button to start the upgrade procedure.
4
Please press the “Reboot System” button to make it reboot.
【
Updating the firmware by the TFTP server
】
1
Downloading the TFTP program from our web site and install it first. Executing
the TFTP program before you want to use the TFTP upgrade method.
2
Pick up the “Rom Upgrade” button to enter the upgrading web page and switch
to the TFTP method. (see figure 3.19)
Figure 3.19: ROM Upgrade for TFTP
3
Key in the IP address of your TFTP server, pick up the file type for your upgrade
file and the correct file name for upgrading. (see figure 3.20)
19216811.live