Page 16 / 83
Scroll up to view Page 11 - 15
14
3
Press the reboot if you want the configuration executed.
Figure 2.9: Reboot the system
2.3.2 DHCP mode
1
Enable the DHCP if you are using the cable modem or DHCP server.
Figure 2.10: Enable the DHCP function
Page 17 / 83
15
2
Please commit the data and reboot the machine after you enable the DHCP function.
2.3.3 PPPoE mode
1
Enable the PPPoE and press the info about PPPoE configuration in the correct
table.
Figure 2.11: Switch to PPPoE function
Page 18 / 83
16
2
Enter the Login account and password. Press the “OK” button if the
configuration is finished. (see figure 2.12)
Figure 2.12: Configure the info about PPPoE
3
Please commit the data and reboot the machine after you finished the
configuration of PPPoE.
2.4 Making a VoIP Call
There are two modes that you could configure the gateway for making VoIP calls.
One is the Peer-to-Peer mode, another is Proxy mode. The configurations and
functions are different. Please make sure about the mode you want and follow up
the step to configure your gateway.
2.4.1 Configure the gateway into the Peer-to-Peer mode
1
Enter the SIP Configuration table and change the mode to Peer-to-Peer. Define
the port numbers whatever you like. Press the “OK” button if the configuration is
all finished. (see figure 2.13)
Page 19 / 83
17
Figure 2.13: Configure the Peer-to-Peer mode
Page 20 / 83
18
2
Enter the Phone Book configuration table and configure the name, ip address
and phone number of the destination. (see figure 2.14)
Figure 2.14: Phone Book
【
Example
】
Figure 2.15: Phone Book
19216811.live