Page 6 / 83
Scroll up to view Page 1 - 5
4
1.2 Features and specification
Features
-
IETF RFC 3261
-
Automatically Dial Path Selection (IP or PSTN)
-
PSTN Line switch to telephone set when power is failure
-
PPPoE support
-
Behind NAT router or IP sharing device
-
DNS server inquiry
-
Provide Peer-to-Peer Mode (Non SIP Proxy needed) selection
-
E.164 Dial Plan
-
TFTP/FTP software upgrade
-
Remote configuration/ reset
-
LED indication for system status
-
Support Fix IP and DHCP
Audio feature
-
Codec -- G.711 a/
μ
law, G.723.1 (6.3kbps), G.729, G.729A
-
G.168/165-compliant adaptive echo cancellation
-
Dynamic Jitter Buffer
-
Completed voice band signaling support
-
Provide In-band or RFC2833 DTMF generation/detection
-
Provide call progress tone
Management Features:
Three easy ways for system configuration
-
Console port: RS-232C port
-
TELNET
-
HTTP Brower (e.g. Internet Explorer)
Certification
-
UL, CE, FCC
FXO Features
-
2-wire loop start
-
Support auto-attendant (Tone or voice greeting)
Page 7 / 83
5
-
PSTN polarity reversal detection
-
Disconnect tone detection
-
Asking ping function with the incoming calls from PSTN side
-
Record and analyze the Tone from PSTN side
Environmental
-
Operation temp:0
°
C to 40
°
C
-
Humidity: 10% to 90% (Non-condensing)
Page 8 / 83
6
1.3 Accessories and equipment
±
The voice gateway in 4 FXO ports models and only one RJ-45 connector
(WAN).
±
The AC adapter.
±
The CD of user manual.
±
The connection cable in RS-232 interface.
Page 9 / 83
7
1.4 Appearance
Front panel
: The LED lights provide related system messages of the gateway.
Power:
Light on means Gateway is power on, and vice versa.
LINE:
Light on means the line is in use (off-hook), and vice versa.
Link:
Light on means the Gateway was connected with the network connector.
Act:
LED should be light on and in flash display when data is transmitting.
Ready:
1. Light on and slow flash means Gateway is in normal mode.
2. Light on and fast flash means Gateway is in downloading mode.
Status:
1. LED light on means Gateway has successfully registered to Proxy when it is in
the Proxy Mode.
2. LED flash means Gateway is not registered to the Proxy when it is in the Proxy
Mode.
3. Or when Gateway is in downloading mode, LED should be flash as well.
4. LED light off means Gateway is in Peer-to-Peer Mode.
Back panel:
1. Ethernet Port
LAN/WAN: 10/100 Base-T;
RJ-45 socket, complied with ETHERNET
Page 10 / 83
8
10/100base-T.
The pin-out is as following:
PIN 1, 2: Transmit
PIN 3, 6: Receive
2. COM:
RS232 console port (DB-9pin
male
connector)
Note:
use straightforward cable to connect to your computer.
PINOUTS
Pin
Name
Dir
Description
2
RXD
Receive Data
3
TXD
Transmit Data
5
GND
System Ground
3. LINE:
RJ-11 connector, FXO interface is for connecting the extension line of PABX or
PSTN Line.
4. 12V DC:
Input AC 100V~120V;output DC12V.
19216811.live