Page 61 / 92
Scroll up to view Page 56 - 60
DSL-G604T 54Mbps Wireless ADSL2/2+ Modem/Router Manual
Figure 5- 17. Wireless Performance window
61
Page 62 / 92
DSL-G604T 54Mbps Wireless ADSL2/2+ Modem/Router Manual
6
Tools
The Tools tab allows you to set up basic maintenance features on the ADSL router. The windows
available under this tab include
Admin
,
Time
,
Remote Log,
System, Firmware, Micellaneous,
and
Test
.
Admin
The
Admin
window allows you to configure a new password for theADSL Router. There is only one
administrator account that can access the DSL-G604T’s web management interface. To change the
password enter the new password into the
New Password
field and repeat the password in the
Confirm Password
field. To change the Router’s port number use the
Web Port
field. Click
Apply
to
set your new password. This wildow will also allow the user to enable remote management of the
device from a remote computer, either through the web management or through Telnet. To configure
this function, click the
Enabled
radio button under the
Remote Management
heading, enter the
IP
Address
of the computer you wish to allow to remotely configure the Router, along with the
corrsponding SubnetMask (
Netmask
). Click
Apply
to set these configurations into the memeory of
the Router.
62
Page 63 / 92
DSL-G604T 54Mbps Wireless ADSL2/2+ Modem/Router Manual
Figure 6- 1. Administrator Settings window
Time
The system time is the time used by the DSL-G604T for scheduling services. You can manually set
the time, connect to a NTP (Network Time Protocol) server or synchronize the time on the router with
your PC. If an NTP server is set, you will only need to set the time zone (in the set up wizard). You
may also set the time from the clock on your computer by checking the corresponding radio button. To
manually set the time, you will need to input the value into the fields provided. Click
Apply
to set
changes.
63
Page 64 / 92
DSL-G604T 54Mbps Wireless ADSL2/2+ Modem/Router Manual
Figure 6- 2. Time window
Remote Log
Use the Remote Log menu to set up logging to servers or computers that are located outside the LAN
or subnet of the Router.
64
Page 65 / 92
DSL-G604T 54Mbps Wireless ADSL2/2+ Modem/Router Manual
Figure 6- 3. Remote Log window
Select the
Log Level
from the pull-down menu. The levels available are:
Alert, Critical, Debug, Error,
Info, Notice, Panic
and
Warning
.
Type in the IP address of a receiver for the log message in the
Add
an IP Address
field and click on the
Add
button. Log message receivers that are added appear listed
in the
Select a logging destination
pull-down menu. These may be used at any time for other types of
log messages. To remove a log message receiver from the list, select it and click on the
Remove
button. Click the
Apply
button when you have configured the log message receivers. Remember to
save the settings to non-volatile memory.
65
19216811.live