Page 56 / 92
Scroll up to view Page 51 - 55
DSL-G604T 54Mbps Wireless ADSL2/2+ Modem/Router Manual
G.Dmt
and
G.lite.
Your ISP must provide this information to you. Click
Apply
after you have made
the proper selection.
Figure 5- 12. ADSL window
ATM VCC
The ATM VCC window shows you the current WAN settings implemented on your ADSL Router
under the heading ATM VCs List at the bottom of the screen. Selecting a Connection Type will
change the window for the values for the Connection setting selected. These values have already been
described in the
WAN
section of the
Home
setup. Click
Apply
to set changes into the Router’s
memory.
56
Page 57 / 92
DSL-G604T 54Mbps Wireless ADSL2/2+ Modem/Router Manual
Figure 5- 13. ATM VCC window
Wireless Management
The
Wireless Management
menu located in the
Advanced
directory is used to control MAC address
access to the wireless access point and to view a list of MAC addresses that are currently associated
57
Page 58 / 92
DSL-G604T 54Mbps Wireless ADSL2/2+ Modem/Router Manual
with the access point. This menu is also be used to enable and configure use of multiple SSIDs. To use
more than one SSID, WEP and WPA security must first be disabled (see below).
Figure 5- 14. Wireless Management
Configure Wireless Access Control
To create a list of MAC addresses that are banned or allowed association with the wireless access
point:
1.
Click in the
Enable Access List
option box to select it.
2.
Select the action to perform on the MAC address to be specified. Choose to
Allow
or Deny
association.
3.
Type in the
MAC Address
in the entry field provided.
4.
Click the
Add
button to add the MAC address to the list. The MAC address will appear listed
in the table below.
5.
After compiling the list of MAC addresses as desired, click the
Apply
button to enforce access
control for the MAC addresses in the list.
To remove any MAC address from the list, click the radio button in the left column of the list for the
MAC address to be removed and click the
Apply
button. To view a list of stations currently associated
with the access point, click the
Associated Stations
radio button.
58
Page 59 / 92
DSL-G604T 54Mbps Wireless ADSL2/2+ Modem/Router Manual
Figure 5- 15. Wireless Management –Associated Stations window
Configure Multiple SSID
Multiple SSID cannot be used if the access point has either WPE or WPA enabled. This must first be
disabled in the Wireless menu located in the Home directory.
To configure multiple SSID:
1.
Disable WEP or WPA in the
Wireless
menu of the
Home
directory.
2.
Click in the
Enable Multiple SSID
option box to select it.
3.
Enter the
SSID
you want to add.
4.
Click the
Add
button to add the SSID to the list.
5.
Click the
Apply
button to enable the listed SSIDs.
To remove an SSID from the list, click the radio button in the left column of the list for the SSID to be
removed and click the
Apply
button.
59
Page 60 / 92
DSL-G604T 54Mbps Wireless ADSL2/2+ Modem/Router Manual
Figure 5- 16. Wireless Management –Multiple SSID window
Wireless Performance
If you want to change the wireless settings, click the
Wireless Performance
menu
button in the
Advanced
directory
Note
It is recommended for most users to use the default Wireless LAN Performance settings. Any
changes made to these settings may adversely affect your wireless network. Under certain
circumstances, changes may benefit performance. Carefully consider and evaluate any
changes to these wireless settings.
60
19216811.live