Page 36 / 80
Scroll up to view Page 31 - 35
Section 2 – Installation
D-Link DSL-526B User Manual
36
Statistics
To access the Router’s
Statistics
window, click the
Statistics
link in the
Device Info
directory.
LAN
To access LAN Statistics, click the
LAN
link in the
Statistics
directory.
This window displays the Router’s LAN statistics. Click the
Reset
Statistics
button to refresh these statistics.
WAN
To access WAN Statistics, click the
WAN
link in the
Statistics
directory.
This window displays the Router’s WAN statistics. Click the
Reset
Statistics
button to refresh these statistics.
Page 37 / 80
Section 2 – Installation
D-Link DSL-526B User Manual
37
ATM
To access ATM Statistics, click the
ATM
link in the
Statistics
directory.
This window displays the Router’s ATM statistics. Click the
Reset
button
to refresh these statistics.
Page 38 / 80
Section 2 – Installation
D-Link DSL-526B User Manual
38
ADSL
To access ADSL Statistics, click the
ADSL
link in the
Statistics
directory.
This window displays the Router’s ADSL statistics. Click the
Reset
Statistics
button to refresh these statistics.
Click the
ADSL BER Test
button to access the ADSL Bit Error Rate Test
window displayed below:
Page 39 / 80
Section 2 – Installation
D-Link DSL-526B User Manual
39
Route
To access the
Device Info – Route
window, click the
Route
link in the
Device Info
directory.
This read-only window displays routing info.
ARP
To access the
Device Info – ARP
window, click the
ARP
link in the
Device Info
directory.
This read-only window displays Address Resolution Protocol info.
DHCP
To access the
Device Info – DHCP
window, click the
DHCP
link in the
Device Info
directory.
This read-only window displays the current DHCP leases on the Router.
Page 40 / 80
Section 3 – Configuration
D-Link DSL-526B User Manual
40
Advanced Setup
This chapter includes the more advanced features used for network management and security as well as administrative tools to manage the Router,
view status and other information used to examine performance and for troubleshooting.
WAN
To access the
Wide Area Network (WAN) Setup
window, click the
WAN
button in the
Advanced Setup
directory.
ADVANCED SETUP – Wide Area Network (WAN) Setup
This window is used to configure the WAN interface. You can add, delete,
and modify WAN interfaces on this window.
Once the desired changes to the WAN interface are complete, click the
Save/Reboot
button.
If you are setting up the WAN interface for the first time, click the
Add
button.
ADVANCED SETUP – ATM PVC Configuration
This window allows you to set up ATM PVC configurations for the Router.
Enter a Port Identifier, Virtual Path Identifier, and Virtual Channel
Identifier. The VPI and VCI values should be provided by your ISP. Select
the Service Category that your ISP uses from the
Service Category
drop
down menu.
This window also allows you to enable QoS by ticking the
Enable Quality
of Service
check box. Click the
Next
button to continue.
19216811.live