Page 31 / 80
Scroll up to view Page 26 - 30
Section 3 – Configuration
D-Link DSL-526B User Manual
31
IPoA
QUICK SETUP – IPoA
Click the
IP over ATM (IPoA)
radio button on this window. This window
also allows you to use the drop-down menu to select the desired
Encapsulation Mode. Click the
Next
button to continue.
QUICK SETUP – IPoA
This window allows you to configure the WAN IP settings. This information
is obtained from your ISP. Click the
Next
button to continue.
Page 32 / 80
Section 2 – Installation
D-Link DSL-526B User Manual
32
QUICK SETUP – IPoA
This window allows you to enable or disable Network Address
Translation and a firewall for your Router. In addition, you can enable or
disable IGMP multicasting and WAN service. Click the
Next
button to
continue.
QUICK SETUP – IPoA
This window allows you to enter an IP address and subnet mask for the
LAN interface. In addition, you can either enable or disable the DHCP
server.
To enable the DHCP server, enter a starting IP address, an ending IP
address, and a subnet mask. You may also choose to change the default
value of the leased time. Click the
Next
button to continue.
Page 33 / 80
Section 2 – Installation
D-Link DSL-526B User Manual
33
QUICK SETUP – IPoA
This summary window allows you to confirm the settings you have just
made. Click the
Save/Reboot
button to save your new IP over ATM
settings and restart the Router.
Page 34 / 80
Section 3 – Configuration
D-Link DSL-526B User Manual
34
Device Info
To access the
Device Info
window, click either the
Device Info
link. The following page opens:
This window displays different information about the Router, including
Summary, WAN, Statistics, Route, ARP, and DHCP information.
Page 35 / 80
Section 2 – Installation
D-Link DSL-526B User Manual
35
Summary
To access the
Summary
window, click the
Summary
link in the
Device Info
directory.
This window displays the current status of your DSL connection, including
the software version, LAN IP address and DNS server address.
WAN
To access the
WAN Info
window, click the
WAN
link in the
Device Info
directory
This window displays the current status of your WAN connection.
19216811.live