Page 61 / 80
Scroll up to view Page 56 - 60
Section 3 – Configuration
D-Link DSL-526B User Manual
61
Routing
To access the
Routing
windows, click the
Routing
link in the
Advanced Setup
directory.
Default Gateway
If the
Enable Automatic Assigned Default Gateway
check box is ticked,
the Router will accept the first default gateway assignment received from
one of the enabled PPPoA, PPPoE, or MER/DHCP enabled PVC(s).
If this checkbox is not ticked, enter the static default gateway and/or a
WAN interface. Click the
Save/Apply
button when you are finished.
Static Route
To add a new static route click on the
Static Route
link in the
Routing
directory.
Click the
Add
button to access the following window.
Enter the static routing information for an entry to the routing table.
Click the
Save/Apply
button when you are finished.
Page 62 / 80
Section 3 – Configuration
D-Link DSL-526B User Manual
62
RIP
The
RIP
button appears when configuring the WAN interface in the
Advanced Setup
folder.
The Router supports both RIP-1 and RIP-2 exchanges with other routers.
Click the
Enabled
radio button for
Global RIP Mode
to active the
function. You can also configure individual interfaces in the table on this
window.
Page 63 / 80
Section 3 – Configuration
D-Link DSL-526B User Manual
63
DNS
To access the
DNS Settings
window, click the
DNS
link in the
Advanced Setup
directory. Please note that this menu entry only appears once a
DSL connection has been configured on the Router.
DNS Server
Tick the
Enable Automatic Assigned DNS
check box if you want the
Router to accept the first received DNS assignment from one of the
enabled PVC’s during the connection established.
To manually specify your own DNS server IP addresses, deselect the
Enable Automatic Assigned DNS check box and type in a
Primary DNS
server
IP address and
Secondary DNS server
IP address in the
appropriate boxes.
Page 64 / 80
Section 3 – Configuration
D-Link DSL-526B User Manual
64
DSL
To access the
DSL Settings
window, click the
DSL
option in the
Advanced Setup
directory.
This window allows you to select the desired modulation, phone line pair,
and capability. Carry out the following to configure the DSL Settings:
e
Tick the text boxes of the modulation types you want to
enable.
e
Choose the
Inner pair
or
Outer pair
option by clicking the
appropriate radio button.
e
Tick the text boxes of the capability options you want to
enable.
e
Click the
Save/Apply
button when you are finished.
Click the
Advanced Settings
button to select a DSL test mode.
Page 65 / 80
Section 3 – Configuration
D-Link DSL-526B User Manual
65
Select the desired DSL test mode and then click the
Apply
button.
Click the
Tone Selection
button to modify the upstream and downstream
tones.
Select the appropriate upstream and downstream tones for your ADSL
connection. Click the
Apply
button to let your settings take effect
.
19216811.live