DSL-504T DSL Router User
’
s Guide
57
B
IP Address Setup
The DSL-504T is designed to provide network administrators maximum flexibility for IP addressing
on the Ethernet LAN. The easiest IP setup choice in most cases is to let the Router do it using
DHCP, which is enabled by default. This appendix briefly describes various options including DHCP,
used for IP setup on a LAN. If you are new to IP networking, the next appendix provides some
background information on basic IP concepts.
Assigning Network IP Addresses
The IP address settings, which include the IP address, subnet mask and gateway IP address are
the first and most important internal network settings that need to be configured. The Router is
assigned a default LAN IP address and subnet mask. If you do not have a preexisting IP network
and are setting one up now, using the factory default IP address settings can greatly ease the
setup process. If you already have a preexisting IP network, you can adjust the IP settings for the
Router to fit within your existing scheme.
Using the Default IP Address
The Router is shipped with a preset default IP address setting of
10.1.1.1 for the LAN port. There
are two ways to use this default IP address, you can manually assign an IP address and subnet
mask for each PC on the LAN or you can instruct the Router to automatically assign them using
DHCP. The simplest method is to use DHCP. The DHCP function is active by default.
Manual IP Address Assignment
Manually configuring IP settings for the LAN means you must manually set an IP address, subnet
mask and IP address of the default gateway (the Router
’
s IP address) on each networked computer.
The example listed below describes IP configuration for computers running Windows 95 or Windows
98. Regardless of what operating system is used on each workstation, the three network IP
settings must be defined so the network interface used by each workstation can be identified by
the Router, and vice versa. For detailed information about configuring your workstations IP settings,
consult the user
’
s guide included with the operating system or the network interface card (NIC).
1.
In Windows 95/98, click on the
Start
button, go to
Settings
and choose
Control Panel
.
2.
In the window that opens, double-click on the
Network
icon.
3.
Under the Configuration tab, select the
TCP/IP
component and click
Properties
.
4. Choose the
Specify an IP address
option and edit the address settings accordingly. Consult the
table below for IP settings on a Class C network.
Host
IP Address
Subnet Mask
Gateway IP
Router
10.1.1.1
255.0.0.0
Computer #1
10.1.1.2
255.0.0.0
10.1.1.1
Computer #2
10.1.1.3
255.0.0.0
10.1.1.1
Computer #3
10.1.1.4
255.0.0.0
10.1.1.1
IP Setup - Example #1
Please note that when using the default IP address as in the above example, the first number in
the IP address must always be the same with only the second, third and fourth number changing.
The first number defines the network IP address (all machines must belong to the same IP
19216811.live