Page 81 / 154
Scroll up to view Page 76 - 80
77
D-Link DSL-4320L User Manual
Section 4 - Configuration
Bridge
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
MTU:
Choose
Bridge
to configure the device as a network bridge.
Page 82 / 154
78
D-Link DSL-4320L User Manual
Section 4 - Configuration
DSL
Select whether to enable or disable each DSL modulation option.
Usually it is best to leave these at their defaults, unless otherwise
instructed by your ISP.
Click
Save
when you are done.
DSL
Modulation:
On this page you can configure your DSL settings. If you are unsure, you can obtain these settings from your ISP.
Page 83 / 154
79
D-Link DSL-4320L User Manual
Section 4 - Configuration
ATM
Select the ATM interface from the drop-down menu.
Enter the Virtual Path Indicator (0 - 255).
Enter the Virtual Channel Indicator (32 - 65535).
Select the latency from the drop-down menu.
Select the method of encapsulation provided by your ISP. You can
select
LLC
or
VCMUX
.
Select the Quality of Service type from the drop-down menu.
Click
Save
when you are done.
Interface:
VPI:
VCI:
Latency:
Encapsulation:
ATM QoS:
On this page you can configure your Asynchronous Transfer Mode (ATM) settings. If you are unsure, you can obtain these settings from your ISP.
Page 84 / 154
80
D-Link DSL-4320L User Manual
Section 4 - Configuration
PTM
On this page you can configure your Packet Transfer Mode (ATM) settings. If you are unsure, you can obtain these settings from your ISP.
Select the PTM interface from the drop-down menu.
Select the latency from the drop-down menu.
Interface:
Latency:
Page 85 / 154
81
D-Link DSL-4320L User Manual
Section 4 - Configuration
IPv6
To configure an IPv6 connection, click the
IPv6
link. To return to the IPv4 settings, click
IPv4
.
Choose your IPv6 connection type from the drop-down menu. You
will be presented with the appropriate options for your connection
type. Click
Advanced Settings...
to expand the list and see all of
the options.
My Internet
Connection Is:
For
Auto Detection
refer to
Auto Detection on page 82.
For
Static IPv6
refer to
Static IPv6 on page 83
.
For
Auto Configuration (SLAAC/DHCPv6)
refer to
Auto Configuration (SLAAC/
DHCPv6) on page 85
.
For
PPPoE
refer to
PPPoE on page 87
.
For
IPv6 in IPv4 Tunnel
refer to
IPv6 in IPv4 Tunnel on page 89
.
For
6 to 4
refer to
6 to 4 on page 91.
For
6rd
refer to
6rd on page 92.
For
Local Connectivity Only
refer to
Local Connectivity Only on page 94.
19216811.live