Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual

Web User Interface Configuration

Page 41

Wireless Network Setup Wizard

Click the

Wireless Connection Setup Wizard

button to initiate the Wireless

connection setup wizard.

After clicking the

Wireless Connection Setup Wizard

button, the following page will

be available.

This wizard will guide user through a step-by-step wizard, divided into 2 steps, to

configure the Wireless connectivity used by this router.

Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual

Web User Interface Configuration

Page 42

Step 1: Welcome to the D-Link Wireless Security Setup Wizard

In this section, we can configure the following:

Network Name (SSID) 2.4GHz:

Enter the wireless network name (SSID), for the

2.4GHz frequency band, here.

Network Name (SSID) 5GHz:

Enter the wireless network name (SSID), for the

5GHz frequency band, here.

Automatically assign a network key:

Select this option to automatically assign a

wireless network key for each wireless band. The router will automatically

generate a strong wireless key.

Manually assign a network key:

Select this option to manually enter a custom

wireless security key.

Click the

Next

button to continue to the next step.

Click the

Cancel

button to discard the changes made and return to the main menu.

Step 2: Set Your Wireless Security Password

After selecting to manually assign a network key, the following page will be available.

In this section, we can configure the following:

Use the same…:

Tick this option to use the same wireless security password on

both 2.4GHz and 5GHz bands.

2.4GHz Wireless Security Password:

Enter the wireless security password for the

2.4GHz band here.

5GHz Wireless Security Password:

Enter the wireless security password for the

5GHz band here.

Click the

Next

button to continue to the next step.

Click the

Prev

button to return to the previous step.

Click the

Cancel

button to discard the changes made and return to the main menu.

Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual

Web User Interface Configuration

Page 43

Setup Complete

On this page we can view a summary of the Wireless settings for confirmation.

Note:

Pay special attention to the

Pre-Shared Key

fields. Wireless clients will need

to enter this password to connect to your wireless network.

Click the

Save

button to save the settings and complete the wizard.

Click the

Prev

button to return to the previous step.

Click the

Cancel

button to discard the changes made and return to the main menu.

Add Wireless Device With WPS Wizard

Click the

Add Wireless Device with WPS

button to initiate the Wi-Fi Protected Setup

(WPS) setup wizard.

Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual

Web User Interface Configuration

Page 44

After clicking the

Add Wireless Device with WPS

button, the following page will be

available.

Step 1: Select Configuration Method for Your Wireless Network

In this section, we can configure the following:

Auto:

Select this option to automatically allow the router and the wireless client to

connect to each other by means of WPS.

Manual:

Select this option to display the configured wireless settings. This

information can then be configured of the wireless clients manually to initiate a

wireless connection.

Click the

Next

button to continue to the next step.

Click the

Cancel

button to discard the changes made and return to the main menu.

Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual

Web User Interface Configuration

Page 45

Step 2: Connect Your Wireless Device

After selecting the

Auto

option, in Step 1, the following page will be available. In this

section, we can configure the following:

PIN:

Select this option to use the Personal Identification Number (PIN) method to

connect the two devices. Enter the PIN number here. Enter the same PIN

number at the wireless client software.

PBC:

Select this option to use the Push Button Configuration (PBC) method to

connect the two devices.

Click the

Connect

button to initiate the WPS connection.

Click the

Prev

button to return to the previous step.

Click the

Cancel

button to discard the changes made and return to the main menu.

After selecting the

PIN

option, in Step 2, the following page will be available.

The router will allow 120 seconds for the WPS connection to initiate.

After selecting the

PBC

option, in Step 2, the following page will be available. Press

the WPS button on the wireless client to initiate the connection.

The router will allow 120 seconds for the WPS connection to initiate.