D-Link DSL-2890AL Router Manual PDF (Setup & Configuration Guide)

Page 36 / 186 Scroll up to view Page 31 - 35

Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual

Web User Interface Configuration

Page 36

Internet Connection Type – Dynamic IP (DHCP)

In this section we can configure the Internet connection type. Parameters available

for configuration are the following:

My Internet Connection is:

Select the Internet connection type here. Options to

choose from are

Static IP

,

Dynamic IP (DHCP)

,

PPPoE

(Username/Password)

,

PPPoA (Username/Password)

, and

Bridge

. This

section will explain the parameters that are available after selecting the

Dynamic IP (DHCP)

option.

Host Name:

Enter the host name used for the Internet connection here.

Use Unicasting:

Tick this option to use the unicasting method to connect to the

DHCP server.

Primary DNS Address:

Enter the primary DNS IP address here.

Secondary DNS Address:

Enter the secondary DNS IP address here. This field is

optional.

MTU:

Enter the Maximum Transmission Unit (MTU) value here.

MAC Address:

Enter the MAC address used for the Internet connection here.

Alternatively, click the

Clone Your PC’s MAC Address

button to use the PC’s

MAC address that was originally used to connect to the Internet before the

purchase of this router.

Note:

This information is usually supplied by the ISP.

Click the

Save Settings

button to accept the changes made.

Click the

Don’t Save Settings

button to discard the changes made.

Page 37 / 186

Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual

Web User Interface Configuration

Page 37

Internet Connection Type – PPPoE (Username/Password)

In this section we can configure the Internet connection type. Parameters available

for configuration are the following:

My Internet Connection is:

Select the Internet connection type here. Options to

choose from are

Static IP

,

Dynamic IP (DHCP)

,

PPPoE

(Username/Password)

,

PPPoA (Username/Password)

, and

Bridge

. This

section will explain the parameters that are available after selecting the

PPPoE

(Username/Password)

option.

Address Mode:

Select the address mode here. Options to choose from are

Dynamic IP

and

Static IP

.

IP Address:

After selecting the

Static IP

option as the

Address Mode

, enter the

WAN IP address here.

Username:

Enter the PPPoE username here.

Password:

Enter the PPPoE password here.

Verify Password:

Re-enter the PPPoE password here.

Service Name:

Enter the service name here. This field is optional.

Reconnect mode:

Select the re-connect mode here. Options to choose from are

Always On

,

On Demand

, and

Manual

. When selecting to use the

Always On

option, a schedule can be applied to the re-connect mode. To add a new

schedule, click the

New Schedule

button.

Maximum Idle Time:

After selecting

On Demand

as the

Reconnect Mode

, enter

the maximum idle time value here. Entering the value 0 means infinite.

DNS Mode:

Select the method that will be used to obtain DNS IP addresses here.

Options to choose from are

Receive DNS from ISP

and

Enter DNS Manually

.

Primary DNS Address:

After selecting the

Enter DNS Manually

option for the

DNS Mode

, enter the primary DNS IP address here.

Secondary DNS Address:

After selecting the

Enter DNS Manually

option for the

DNS Mode

, enter the secondary DNS IP address here. This field is optional.

MTU:

Enter the Maximum Transmission Unit (MTU) value here.

MAC Address:

Enter the MAC address used for the Internet connection here.

Alternatively, click the

Clone Your PC’s MAC Address

button to use the PC’s

MAC address that was originally used to connect to the Internet before the

purchase of this router.

Click the

Save Settings

button to accept the changes made.

Click the

Don’t Save Settings

button to discard the changes made.

Page 38 / 186

Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual

Web User Interface Configuration

Page 38

Internet Connection Type – PPPoA (Username/Password)

In this section we can configure the Internet connection type. Parameters available

for configuration are the following:

My Internet Connection is:

Select the Internet connection type here. Options to

choose from are

Static IP

,

Dynamic IP (DHCP)

,

PPPoE

(Username/Password)

,

PPPoA (Username/Password)

, and

Bridge

. This

section will explain the parameters that are available after selecting the

PPPoA

(Username/Password)

option.

Username:

Enter the PPPoA username here.

Password:

Enter the PPPoA password here.

Verify Password:

Re-enter the PPPoA password here.

Service Name:

Enter the service name here. This field is optional.

Reconnect mode:

Select the re-connect mode here. Options to choose from are

Always On

,

On Demand

, and

Manual

. When selecting to use the

Always On

option, a schedule can be applied to the re-connect mode. To add a new

schedule, click the

New Schedule

button.

Maximum Idle Time:

After selecting

On Demand

as the

Reconnect Mode

, enter

the maximum idle time value here. Entering the value 0 means infinite.

DNS Mode:

Select the method that will be used to obtain DNS IP addresses here.

Options to choose from are

Receive DNS from ISP

and

Enter DNS Manually

.

Primary DNS Address:

After selecting the

Enter DNS Manually

option for the

DNS Mode

, enter the primary DNS IP address here.

Secondary DNS Address:

After selecting the

Enter DNS Manually

option for the

DNS Mode

, enter the secondary DNS IP address here. This field is optional.

Click the

Save Settings

button to accept the changes made.

Click the

Don’t Save Settings

button to discard the changes made.

Page 39 / 186

Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual

Web User Interface Configuration

Page 39

Internet Connection Type – Bridge

In this section we can configure the Internet connection type. Parameters available

for configuration are the following:

My Internet Connection is:

Select the Internet connection type here. Options to

choose from are

Static IP

,

Dynamic IP (DHCP)

,

PPPoE

(Username/Password)

,

PPPoA (Username/Password)

, and

Bridge

. This

section will explain the parameters that are available after selecting the

Bridge

option.

Note:

Enabling this Internet connection method will display the routing function of this

device.

Click the

Save Settings

button to accept the changes made.

Click the

Don’t Save Settings

button to discard the changes made.

Page 40 / 186

Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual

Web User Interface Configuration

Page 40

Wireless Settings

To access the

Wireless Settings

page, click on the

Setup

menu link, at the top, and then click on the

Wireless Settings

menu link, on the left.

On this page we can configure services related to the Wireless connectivity of this

product.

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share