D-Link DSL-2890AL Router Manual PDF (Setup & Configuration Guide)

Page 26 / 186 Scroll up to view Page 21 - 25

Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual

Web User Interface Configuration

Page 26

Step 1: Set Your Password

On this page we can configure the Web UI login password for his router. In this

section, we can configure the following:

Password:

Enter the new Web UI login password here.

Verify Password:

Enter the new Web UI login password here again.

Note:

For security, it is highly recommended to change the default login password for

this router. The username cannot be changed.

Click the

Cancel

button to discard the changes made and return to the main menu.

Step 2: Select Your Time Zone

After configuring the Web UI login details, we can configure the time zone used by

this router. In this section, we can configure the following:

Time Zone:

Select the time zone that should be used by this router. This will be

used by the time and date configuration later on in this manual.

Click the

Cancel

button to discard the changes made and return to the main menu.

Page 27 / 186

Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual

Web User Interface Configuration

Page 27

Step 3: Configure Your Internet Connection

After configuring the time zone, we can select an Internet connection type from the

list provided. In this section, we can configure the following:

Country:

Select your country from the drop-down menu. After selecting your

country from the drop-down menu, the VPI and VCI parameters will

automatically be selected for your country.

VPI:

Enter the Virtual Path Identifier (VPI) value here.

VCI:

Enter the Virtual Circuit Identifier (VCI) value here.

DHCP Connection (Dynamic IP Address):

Select this option when your Internet

connection can be made automatically. When selecting this option, this wizard

will automatically continue to step 2.

Username / Password Connection (PPPoE):

Select this option when your Internet

connection requires a username and a password. For DSL connections, use

this option.

Username / Password Connection (PPPoA):

Select this option when your

Internet connection requires a PPPoA username and password.

Static IP Address Connection:

Select this option when your Internet connection

requires an IP address, Default Gateway IP address, and DNS IP addresses.

Bridge Connection:

Select this option to use this device as a bridging device

between your LAN and the ISP. When selecting this option, this wizard will

automatically continue to step 2.

Click the

Cancel

button to discard the changes made and return to the main menu.

Page 28 / 186

Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual

Web User Interface Configuration

Page 28

After selecting to use the

DHCP Connection (Dynamic IP Address)

connection

method, the following page will be available. In this section, we can configure the

following:

MAC Address:

Enter the MAC address used for the Internet connection here.

Alternatively, click the

Clone Your PC’s MAC Address

button to use the PC’s

MAC address that was originally used to connect to the Internet before the

purchase of this router.

Host Name:

Enter the host name used for the Internet connection here.

Primary DNS Address:

Enter the primary DNS IP address here.

Secondary DNS Address:

Enter the secondary DNS IP address here. This field is

optional.

Note:

This information is usually supplied by the ISP.

Click the

Cancel

button to discard the changes made and return to the main menu.

After selecting to use the

Username/Password Connection (PPPoE)

connection

method, the following page will be available. In this section, we can configure the

following:

User Name:

Enter the PPPoE username here.

Password:

Enter the PPPoE password here.

Note:

This information is usually supplied by the Internet Service Provider (ISP).

Click the

Cancel

button to discard the changes made and return to the main menu.

Page 29 / 186

Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual

Web User Interface Configuration

Page 29

After selecting to use the

Username/Password Connection (PPPoA)

connection

method, the following page will be available. In this section, we can configure the

following:

User Name:

Enter the PPPoA username here.

Password:

Enter the PPPoA password here.

Note:

This information is usually supplied by the Internet Service Provider (ISP).

Click the

Cancel

button to discard the changes made and return to the main menu.

After selecting to use the

Static IP Address Connection

method, the following page

will be available. In this section, we can configure the following:

IP Address:

Enter the WAN static IP address here.

Subnet Mask:

Enter the WAN subnet mask here.

Gateway Address:

Enter the WAN gateway IP address here.

Primary DNS Address:

Enter the primary DNS IP address here.

Secondary DNS Address:

Enter the secondary DNS IP address here. This field is

optional.

Note:

This information is usually supplied by the ISP.

Click the

Cancel

button to discard the changes made and return to the main menu.

Page 30 / 186

Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual

Web User Interface Configuration

Page 30

Setup Complete

After clicking the

can view a confirmation message, confirming that the D-Link Internet Connection

Setup Wizard is completed.

Click the

Connect

button to initiate an attempt to connect to the Internet using the

settings configured throughout this wizard.

Click the

Cancel

button to discard the changes made and return to the main menu.

Manual Internet Connection Option

Click the

Manual Internet Connection Setup

button to navigate to the Internet

Connection Setup page to manually configure the Internet Connection.

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share