1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DSL-2877AL
    5. /
  5. 8
Page 36 / 114 Scroll up to view Page 31 - 35
D-Link DSL-2877AL Dual Band Wireless AC750 VDSL/ADSL2+ Modem Router User Manual
Section 3 - Web User Interface Configuration
Page 34
On the next Page sign up mydlink
TM
Cloud Services account.
In this section we can configure the following parameters.
E-mail Address (Account Name):
Enter the E-mail address (Account Name).
Password:
Enter the password.
Confirm Password:
Enter the confirm password.
First Name:
Enter the first name.
Last Name:
Enter the last name.
Click the
Sign Up
button to sign up mydlink
TM
Cloud Services account.
Click the
Prev
button to discard the changes made and return to the previous page.
Click the
Next
button to continue to the next page.
Click the
Cancel
button to discard the changes made and return to the main page.
Click the
Connect
button to connect to the internet.
Page 37 / 114
D-Link DSL-2877AL Dual Band Wireless AC750 VDSL/ADSL2+ Modem Router User Manual
Section 3 - Web User Interface Configuration
Page 35
Internet Setup
To access the
Internet Setup
page, click on the
Setup
menu link at the top, and then click on the
Internet Setup
menu link on the left.
You can manually configure the connection from this page. Please make sure you
have your ISP's connection settings first if you manually configure the connection.
Mode Select
Internet Connection Type
：
Select the modes including
ADSL
,
VDSL
and
Ethernet WAN (NBN/UFB)
.
Page 38 / 114
D-Link DSL-2877AL Dual Band Wireless AC750 VDSL/ADSL2+ Modem Router User Manual
Section 3 - Web User Interface Configuration
Page 36
ATM VC Setting
Select
Internet Connection Type
as
ADSL
to configure the ADSL setting for the
WAN mode.
PVC
：
Select the PVC index, it includes 8 PVC index: 0 ~ 7.
Enable Virtual Circuit
：
Enable or disable the virtual circuit.
Country:
In this drop-down menu, the user can select one country option. To
manually configure this connection, the user can choose the third option called
Other
.
ISP:
After selecting a country, in the previous option, a list of ISP connections will
be available here. If your ISP is in the list, select it here and the correct
parameters will be entered for the rest of the page. However, if your ISP is not
listed here, you can choose the
Other
option.
VPI:
Enter the correct Virtual Path Identifier (VPI) value for your ISP here.
VCI:
Enter the correct Virtual Channel Identifier (VCI) value for your ISP here.
Service Category:
Select the service category; it includes
UBR
,
CBR
,
RT-VBR
and
NRT-VBR
.
802.1q:
Activate or Deactivate the 802.1q for the WAN mode.
VLAN ID:
Enter the VLAN ID if required by your ISP.
PTM Setting
Select
Internet Connection Type
as
VDSL
to configure the VDSL setting for the
WAN mode.
Service Num
：
Select the service number to configure.
Enable Virtual Circuit:
Enable or disable the PTM interface.
Country:
In this drop-down menu, the user can select one country option. To
manually configure this connection, the user can choose the third option called
Other
.
ISP:
After selecting a country, in the previous option, a list of ISP connections will
be available here. If your ISP is in the list, select it here and the correct
parameters will be entered for the rest of the page. However, if your ISP is not
listed here, you can choose the
Other
option.
802.1q:
Activated or deactivated the 802.1q for the WAN mode.
VLAN ID:
Enter the VLAN ID if required by your ISP.
Page 39 / 114
D-Link DSL-2877AL Dual Band Wireless AC750 VDSL/ADSL2+ Modem Router User Manual
Section 3 - Web User Interface Configuration
Page 37
ETH Setting
Select
Internet Connection Type
as
Ethernet WAN (NBN/UFB)
to configure the
Ethernet setting for the WAN mode.
Service Num
：
Select the service number to configure.
Enable Virtual Circuit:
Enable or disable the PTM interface.
802.1q:
Activated or deactivated the 802.1q for the WAN mode.
VLAN ID:
Enter the VLAN ID if required by your ISP.
IPV4/IPV6
IP Version
：
Select the IP version to configure. It includes IPv4, IPv4/IPv6 and
IPv6.
WAN Settings
Select this option to configure the WAN settings including
Dynamic IP Address
,
Static IP Address
,
PPPoA/PPPoE
and
Bridge Mode
.
WAN - Dynamic IP Address
Select this option to set static IP information provided to you by your ISP.
MTU:
If you experience connection issues, you may need to change the MTU
setting for optimal performance with your specific ISP.
Default Route:
Enable or disable default route.
Enable PPPoE Passthrough:
Enable or disable PPPoE Passthrough.
IGMP Proxy:
Enable or disable IGMP proxy.
Page 40 / 114
D-Link DSL-2877AL Dual Band Wireless AC750 VDSL/ADSL2+ Modem Router User Manual
Section 3 - Web User Interface Configuration
Page 38
WAN - Static IP Address
Select this option to set static IP information provided to you by your ISP.
Static IP Address:
Enter the static IP address assigned to you by your ISP.
IP Subnet Mask:
Enter the IP subnet mask assigned to you by your ISP.
Gateway:
Enter the gateway assigned to you by your ISP.
MTU:
If you experience connection issues, you may need to change the MTU
setting for optimal performance with your specific ISP.
Default Route:
Specifies the default route for the WAN interface.
NAT Enable:
Enable or disable NAT function.
Enable PPPoE Passthrough:
Enable or disable PPPoE pass through function.
IGMP Proxy:
Enable or disable IGMP proxy function.
WAN - PPPoA/PPPoE
Select this option if your ISP requires you to use a
PPPoA/PPPoE
connection. This
option is typically used for DSL services. Select
PPPoA/PPPoE
to obtain an IP
address automatically for your
PPPoA/PPPoE
connection. Please enter the
information accordingly.
Please Note the image to the right shows
PPPoE
options.
PPPoA
WAN
page may
differ slightly.
Username:
Enter the username for your product.
Password:
Enter the password for your product.
Confirm Password:
Enter the confirm password.
MTU:
If you experience connection issues, you may need to change the MTU
setting for optimal performance with your specific ISP.
TCP MSS:
Specifies the maximum segment size for the PPPoE connection.
Default Route:
Specifies the default route for the WAN interface.
NAT Enable:
Enable or disable NAT function.
Enable PPPoE Passthrough:
Enable or disable PPPoE pass through function.
IGMP Proxy:
Enable or disable IGMP proxy function.
Connection:
Specifies the PPPoE connect mode.
Get IP Address:
Select the way to get IP address. It is static or dynamic.
Static IP Address:
Enter the static IP address.
IP Subnet Mask:
Enter the IP subnet mask.
Gateway:
Enter the gateway.

Rate

3.5 / 5 based on 2 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top