D-Link DSL-2877AL Dual Band Wireless AC750 VDSL/ADSL2+ Modem Router User Manual

Section 3 - Web User Interface Configuration

Page 44

After clicking the

Manual Wireless Connection Setup

button, the following page will

be available.

In this section we can configure the following parameters.

Wireless Enable:

Tick this option to enable the wireless feature on this router.

MBSSID AP Isolation:

Tick this option to enable the MBSSID AP isolation feature

on this router.

Multiple SSID:

Enter the Wireless name (SSID) here. This name will be available

when wireless clients scan for available wireless networks. However, when the

Hide Access Point

option is enabled, this name will not be visible to wireless

clients.

Hide SSID:

Here we can choose to hide the Wireless SSID by selecting

Enable

to

hide it and

Disable

to reveal it.

WMF:

Here we can enable or disable the Wireless Multimedia Forwarding (WMF)

feature.

802.11 Mode:

Here we can select which 802.11 wireless modes to use. Options to

choose from are

802.11 n Only

,

802.11 B only

,

802.11 G only

,

Mixed

802.11g and 802.11b

,

Mixed 802.11g and 802.11n

and

Mixed 802.11n,

802.11g and 802.11b

. If you are not sure, select the

802.11 B/G/N mixed

option.

Channel Width:

Here we can select the wireless bandwidth range used. Options to

choose from are

Up to 130 Mbps, Up to 270 Mbps

and

Force to 300 Mbps

.

Channel:

Here we can select a wireless channel manually, or select the

Auto

option to allow the router to automatically select the channel with the least

interference.

Security:

Here we can select security to use. Options to choose from are

None

,

WEP-64Bits

,

WEP-128Bits

,

WPA, WPA2

and

WPA/WPA 2

.

Cipher Type:

Here we can select cipher type to use. Options to choose from are

TKIP, AES

and

Both

.

Group Key Interval:

Enter the group key interval.

D-Link DSL-2877AL Dual Band Wireless AC750 VDSL/ADSL2+ Modem Router User Manual

Section 3 - Web User Interface Configuration

Page 45

WEP-64Bits/WEP-128Bits for 2.4Ghz and 5Ghz Wireless Configuration

Make sure that all wireless devices on your network are using the same encryption

level and key. WEP keys must consist of the letters "A" through "F" and the numbers

"0" through "9".

WPA Type for 2.4Ghz and 5Ghz Wireless Configuration

This router supports two type options available in the

WPA Type

.

The types are the

802.1x

and

PSK Value

.

802.1x

WPA RADIUS uses an external RADIUS server to perform user authentication. To

use WPA RADIUS, enter the IP address of the RADIUS server, the RADIUS Port

(default is 1812) and the shared secret from the RADIUS server.

D-Link DSL-2877AL Dual Band Wireless AC750 VDSL/ADSL2+ Modem Router User Manual

Section 3 - Web User Interface Configuration

Page 46

PSK

Is a special mode of WPA for home users without an enterprise authentication server

and provides the same strong encryption protection. To use WPA Pre-Shared Key,

enter a password in the WPA Shared Key field between 8 and 63 bit ASCII or 64 bit

hex characters long.

Wireless Schedule for 2.4Ghz and 5Ghz Wireless Configuration

This is to control Wireless enable or disable base on schedule settings.

WI-FI Protected Setup (Also Called WCH 2.0 in Windows Vista) for 2.4Ghz and 5Ghz Wireless Configuration

Enable:

Enable the Wi-Fi Protected Setup feature.

Current PIN:

Shows the current value of the router's PIN.

Wi-Fi Protected Status:

Shows the Wi-Fi protected status.

D-Link DSL-2877AL Dual Band Wireless AC750 VDSL/ADSL2+ Modem Router User Manual

Section 3 - Web User Interface Configuration

Page 47

LAN Setup

To access the

LAN Setup

page, click on the

Setup

menu link at the top, and then click on the

LAN Setup

menu link on the left.

On this page we can configure services related to the Local Area Network

connectivity of this product.

D-Link DSL-2877AL Dual Band Wireless AC750 VDSL/ADSL2+ Modem Router User Manual

Section 3 - Web User Interface Configuration

Page 48

Router Settings

In this section, the following parameters are available to configure:

Router IP Address:

Enter the local IP address for this router here. This IP address

is also used to connect to this device‟s Web User Interface. Please note that

after changing this I

P address you‟ll be forced to log into the Web User

Interface again, using the new IP address.

Subnet Mask:

Enter the subnet mask used here.

IGMP Snooping:

Activate or deactivate the IGMP snooping function.

DHCP Settings

In this section, the following parameters can be configured:

Disable DHCP Server:

Select this option to disable the DHCP Server option.

Enable DHCP Server:

Select this option to enable the DHCP Server option.

DHCP IP Address Range:

Enter the starting and ending IP address host number

value for the DHCP Server pool here.

DHCP Lease Time:

select the DHCP lease time value used here.

IPv6 Settings

In this section, the following parameters can be configured:

IPv6 Global Address:

Enter the IPv6 Global address for the LAN setting.

Radvd Enable:

Enable or disable Radvd function.

DHCP6 Sever:

Enable or disable DHCPv6 server.

DHCP Table

The Client Table will show the Host Name, IP Address, and MAC Address of each

client computer.