D-Link DSL-2877AL Dual Band Wireless AC750 VDSL/ADSL2+ Modem Router User Manual
Section 2- Basic Installation
Page 19
3. If your mobile device has saved the router
‟
s wireless password, it will be
automatically associated to your router, otherwise D-Link One Touch will pop-up a
password dialog, you need enter correct Wi-Fi password and tap Connect button
associate your router.
10. The device name, device icon and device type will be shown here, if they are not
shown here, you can tap
Scan
button to re-search.
Page 22 / 114
D-Link DSL-2877AL Dual Band Wireless AC750 VDSL/ADSL2+ Modem Router User Manual
Section 2- Basic Installation
Page 20
11. The D-Link One Touch will login router, if login router is fail, the D-Link One touch
will pop-up a login UI, you need enter correct username and password to login the
router.
12. Tap the
Software Upgrader
to start to upgrade firmware for router.
Note
: When performing a firmware upgrade, you need to make sure that the router or
mobile device can access internet.
Page 23 / 114
D-Link DSL-2877AL Dual Band Wireless AC750 VDSL/ADSL2+ Modem Router User Manual
Section 2- Basic Installation
Page 21
13. If the router is not the latest firmware version, then D-Link One Touch will
download it.
14. The latest firmware download is complete; the Download Completed dialog will be
pop-up, tap
OK
button to upgrade the latest firmware for the router.
Page 24 / 114
D-Link DSL-2877AL Dual Band Wireless AC750 VDSL/ADSL2+ Modem Router User Manual
Section 2- Basic Installation
Page 22
15. Uploading the firmware for the router.
16. Upload Completed dialog will be pop-up, tap
OK
button to exit the D-Link One
Touch, and wait a few minutes for
the firmware upgrade is complete.
Page 25 / 114
D-Link DSL-2877AL Dual Band Wireless AC750 VDSL/ADSL2+ Modem Router User Manual
Section 2- Basic Installation
Page 23
Getting Started
This section will show you how to set up and configure your new D-Link router using the Web-based configuration utility.
How to connect to the Web User Interface
Connect to the Router
To configure the WAN connection used by the router it is first necessary to communicate with the router through its management interface, which is HTML-based and can be
accessed using a web browser. The easiest way to make sure your computer has the correct IP settings is to configure it to use the DHCP server in the router.
To access the web user interface, open a web-browser such as Internet Explorer and
19216811.live