17

D-Link DSL-2770L User Manual

Section 3 - Configuration

Select the WAN interface to configure, and whether to enable or disable

it.

Select the WAN connection type for your ISP. Based on which connection

type you choose, different settings will be displayed below. These

settings are described on the following pages after the

Setup.Wizard.

pages.

• Ethernet Over ATM(RFC1483 Bridged) with NAT

• IP over ATM(RFC 1483 Routed)

• PPP over Ethernet

• PPP over ATM

• RFC 1483 Bridged

Enter a host name to use for your connection.

WAN Interface

My Internet

Connection Is:

Host Name:

ADSL Interface

If you clicked the Setup button for ADSL Interface, you will see the following settings. You can click the

Setup.Wizard.

button to use a step by step

wizard that guides you through configuration of your ADSL settings. See the following pages for how to use the

Setup.Wizard

. If you are not sure

what settings to use, please contact your Internet Service Provider.

The settings displayed in the middle will vary depending on what you select for the

My.

Internet.Connection.Is

setting. See the following pages for details.

Select VCMux or LLC based on your ISP’s recommended settings.

Selecting your country and ISP provider from the dropdown boxes will

automatically fill in the VPI and VCI numbers for you.

Enter the VPI number specified by your ISP.

Enter the VCI number specified by your ISP.

Select UBR, CBR, VBR, or GFR based on your ISP’s recommended settings.

You can set multicast mode to Auto, IGMP v1, IGMP v2, or IGMP v3.

You can enable the IGMP snooping function by checking this box.

You can enable and specify the VLAN TAG if required by your ISP.

Data

Encapsulation:

Country/ISP

Provider:

VPI Number:

VCI Number:

Schedule type:

Multicast:

IGMP Snooping:

VLAN TAG:

18

D-Link DSL-2770L User Manual

Section 3 - Configuration

Setup Wizard

This Wizard will help you set up an ADSL connection.

Click

Next

to continue.

Enter a password for your network and verify it in the box below, then click

Next

.

Select your time zone from the drop-down menu and click

Next

.

19

D-Link DSL-2770L User Manual

Section 3 - Configuration

Select your Internet connection type from Ethernet Over ATM (RFC1483 Bridged) with

NAT, IP over ATM(RFC 1483 Routed), PPP over Ethernet, PPP over ATM, and RFC 1483

Bridged. Click

Next

.

Configure some settings for your Internet Connection. See below for the description

of each setting. Click

Next.

when finished.

Select VCMux or LLC based on your ISP’s recommended settings.

Select your country.

Select your ISP provider from the dropdown boxes will automatically

fill in the VPI and VCI numbers for you.

Enter the VPI number specified by your ISP.

Enter the VCI number specified by your ISP.

Click

Clone

to have your computer’s MAC number automatically input.

Data

Encapsulation:

Country:

ISP Provider:

VPI Number:

VCI Number:

MAC Address:

Enter a SSID name for your wireless network and click

Next

.

20

D-Link DSL-2770L User Manual

Section 3 - Configuration

Select a security option for your network from WPA, WPA2, or none. Click

Next

.

Set a wireless security password for your network if you have selected a security option

in the previous step. Click

Next

.

The Internet connection has now been established. Click

Next.

to register for a mydlink

account or click

Connect

to complete the setup.

21

D-Link DSL-2770L User Manual

Section 3 - Configuration

Select

Static.IP

if your ISP assigned you an IP address, subnet mask,

gateway, and DNS server address. In most cases, select

Dynamic.IP

.

Enter the Primary and secondary DNS server IP addresses assigned by

your ISP.

If your ISP requires you to enter a MAC address, fill it in here. You can click

the Clone MAC button to enter your current computer’s MAC address.

If you experience connection issues, you may need to change the

MTU setting for optimal performance with your specific ISP. 1500 is

the default MTU.

Check this to enable the router to use NAT to assign IP addresses for

your devices.

Address Mode

Primary/Secondary

DNS Server:

MAC Address:

MTU:

Enable NAT:

Ethernet Over ATM(RFC1483 Bridged) with NAT