Page 86 / 103
Scroll up to view Page 81 - 85
DSL-2750U User Manual
83
Figure 15
If you are using this device as a RIP-enabled device to communicate with others
using the routing information protocol, enable RIP and click
Apply
to save the
settings.
4.3.13
Schedules
Choose
ADVANCED
>
Schedules
. The page shown in the following figure
appears.
Click
Add
to add schedule rule. The page shown in the following figure appears.
Page 87 / 103
DSL-2750U User Manual
84
Click
Apply
to save the settings.
4.3.14
Logout
Choose
ADVANCED
>
Logout
. The page shown in the following figure appears. In
this page, you can log out of the configuration page.
4.4
Maintenance
4.4.1
System
Choose
MAINTENANCE
>
System
. The
System
page shown in the following
figure appears.
Page 88 / 103
DSL-2750U User Manual
85
In this page, you can reboot the device, back up the current settings to a file,
restore the settings from the file saved previously, and restore the factory default
settings.
The buttons in this page are described as follows:
Reboot
: Reboot the device.
Backup Settings
: Save the settings to the local hard drive. Select a location
on your computer to back up the file. You can name the configuration file.
Update settings
: Click
Browse
to select the configuration file of device and
click
Update Settings
to begin restoring the device configuration.
Restore Default Settings
: Reset the device to default settings.
Notice
: Do not turn off your device or press the
Reset
button while an operation in
this page is in progress.
Page 89 / 103
DSL-2750U User Manual
86
4.4.2
Firmware Update
Choose
MAINTENANCE
>
Firmware Update
. The page shown in the following
figure appears. In this page, you can upgrade the firmware of the device.
The procedure for updating the firmware is as follows:
Step 1
Click
Browse…
to search the file.
Step 2
Click
Update Firmware
to update the configuration file.
The device loads the file and reboots automatically.
Notice
: Do not turn off your device or press the reset button while this procedure is
in progress.
4.4.3
Access Controls
Choose
MAINTENANCE
>
Access Controls
. The
Access Controls
page shown
in the following figure appears. This page contains
Account Password
and
Services
.
Page 90 / 103
DSL-2750U User Manual
87
4.4.3.1
Account Password
In the
Access Controls
page, click
Account Password
. The page shown in the
following figure appears. In this page, you can change the password of the user
and set time for automatic logout.
19216811.live