Page 76 / 103
Scroll up to view Page 71 - 75
DSL-2750U User Manual
73
In this page, you can enable/disable the QoS. Click
Save/Apply
to take the setting
effect.
4.3.11.4
Queue Config
Choose
ADVANCED
>
Network Tools
and click
Queue Config
. The page shown
in the following figure appears.
Click
Add
. The page shown in the following figure appears.
Page 77 / 103
DSL-2750U User Manual
74
Click
Save
/
Apply
to save the settings.
4.3.11.5
QoS Classification
Choose
ADVANCED
>
Network Tools,
and click
QoS Classification
, the page
shown in the following figure appears. This page allows you to config various
classification.
Click
Add
. The page shown in the following figure appears.
Page 79 / 103
DSL-2750U User Manual
76
Figure 12
4.3.11.6
UPnP
Choose
ADVANCED
>
Network Tools
and click
UPnP
. The page shown in the
following figure appears.
In this page, you can configure Universal Plug and Play (UPnP). The system acts
as a daemon after you enable UPnP.
UPnP is used for popular audio visual software. It allows automatic discovery of
your device in the network. If you are concerned about UPnP security, you can
disable it. Block ICMP ping should be enabled so that the device does not respond
to malicious Internet requests.
Click
Apply
to save the settings.
4.3.11.7
ADSL
Choose
ADVANCED
>
Network Tools
and click
ADSL Settings
. The page shown
in the following figure appears.
Page 80 / 103
DSL-2750U User Manual
77
In this page, you can select the DSL modulation. Normally, you can keep the
factory default setting. The device negotiates the modulation mode with the
DSLAM.
Click
Apply
to save the settings.
4.3.11.8 PktFlow
Choose
ADVANCED
>
Network Tools
and click
PktFlow
. The page shown in the
following figure appears.
19216811.live