Page 81 / 103
Scroll up to view Page 76 - 80
DSL-2750U User Manual
78
4.3.11.9
TR-069
Choose
ADVANCED
>
Network Tools
and click
TR-069
. The page shown in the
following figure appears.
In this page, you can configure the TR-069 CPE.
Warning! Changing these settings will prevent Telkom from offering you remote
support. It is recommended that these settings are not changed.
Figure 13
WAN Management Protocol (TR-069) allows an Auto-Configuration Server (ACS)
to perform auto-configuration, provision, collection, and diagnostics to this device.
Page 82 / 103
DSL-2750U User Manual
79
In this page, you may configure the parameters such as the ACS URL, ACS
password, and connection request user name.
After finishing setting, click
Apply
to save and apply the settings.
4.3.11.10 Certificates
Choose
ADVANCED
>
Network Tools
and click
Certificates
. The
Certificates
page shown in the following figure appears. In this page, you can configure local
certificate and trusted certificate.
4.3.12
Routing
Choose
ADVANCED
>
Routing
. The page shown in the following figure appears.
Page 83 / 103
DSL-2750U User Manual
80
Figure 14
4.3.12.1
Static Route
Choose
ADVANCED
>
Routing
and click
Static Route
. The page shown in the
following figure appears. This page is used to configure the routing information. In
this page, you can add or delete IP routes.
Click
Add
to add a static route. The page shown in the following figure appears.
Page 84 / 103
DSL-2750U User Manual
81
Destination Network Address
: The destination IP address of the router.
Subnet Mask
: The subnet mask of the destination IP address.
Use Gateway IP Address
: The gateway IP address of the router.
Use Interface
: The interface name of the router output port.
You can click
Use Gateway IP Address
or
Use Interface
.
Click
Apply
to save the settings.
4.3.12.2
Default Gateway
Choose
ADVANCED
>
Routing
and click
Default Gateway
. The page shown in
the following figure appears.
Select the WAN interface as your default gateway. Click
Apply
to save the settings.
Page 85 / 103
DSL-2750U User Manual
82
4.3.12.3
Policy Routing
Choose
ADVANCED
>
Routing
and click
policy
Routing
. The page shown in the
following figure appears.
The policy route binds one WAN connection and one LAN interface.
Click
Add
, the page shown in the following figure appears.
4.3.12.4
RIP
Choose
ADVANCED
>
Routing
and click
RIP
. The page shown in the following
figure appears. This page is used to select the interfaces on your device that use
RIP and the version of the protocol used.
19216811.live