Page 81 / 95
Scroll up to view Page 76 - 80
81
DSL-2750B User Guide
7. Browse to
System
>
Network Connections
and click
WAN-LAN Bridge
.
8. Click the
Settings
tab.
Page 82 / 95
82
DSL-2750B User Guide
9. Under
Internet Protocol
, change the setting to
No IP Address
. Click
Apply
.
10. When the Browser Reload message appears, click
OK
.
11. The following settings take place once the DSL-2750B is in Bridge mode:
a. VPI/VCI: 0/35
b. Encapsulation: LLC
c.
DHCP server is disabled for both wired/wireless clients
d. GUI is accessible only through
192.168.1.1 by a PC configured with static IP address of 192.168.1.x/24.
Note:
Once you have configured the DSL-2750B for Bridge mode, release and renew your network adapter cards.
On a DHCP line, your PC will now receive a public IP address.
On a PPPoE line, you should receive a 169.254.x.x IP address. The GUI will not be accessible and you should get the
following message when trying to do so.
Page 83 / 95
83
DSL-2750B User Guide
Before following the steps below, please factory reset the DSL-2750B.
1. Open a web browser and enter
.
2. Log in with the default user name (
admin
) and password (refer to back label of 2750B).
3. Select
My Network
>
Internet
.
4. From the drop-down menu next to
Connection type
, select
LAN-WAN Bridged Ethernet Connection
over ATM (Bridged ETHoA)
.
Multiple Static Public IPs
5. Click
Apply
.
6. When the following message appears, click
OK
.
Page 84 / 95
84
DSL-2750B User Guide
7. Click
System
>
Network Connections
>
WAN-LAN Bridge
.
8. Click
Settings
.
9. From the drop-down menu next to
Internet Protocol
, select
Use the Following IP Address
.
a.
This will give you the option to input the static IP Address, Subnet, Gateway and DNS.
b. Enter your information and click
Apply
.
Page 85 / 95
85
DSL-2750B User Guide
10. When the following message appears, click
OK
.
11. Additional Public IP Addresses can be statically configured on LAN PCs.
19216811.live