Page 76 / 95
Scroll up to view Page 71 - 75
76
DSL-2750B User Guide
Objects and Rules
Protocols
The Protocols page will display all the default and user-created services and their port information. This is
used for the Port Forwarding and Port Triggering features. You may click the pencil icon to edit the item, click
the red X to remove the item, or scroll all the way to the bottom and click
New Entry
on the left side to create
a new protocol.
Page 77 / 95
77
DSL-2750B User Guide
Network Objects
Network objects are devices on your local network such as computers, game consoles, media players, Internet
TVs, and network storage (NAS) devices, or a specific IP address or a range of IP address. You can add a network
object by clicking
New Entry
.
Page 78 / 95
78
DSL-2750B User Guide
Scheduler Rules
Scheduler Rules will allow you to set up a specific schedule that you can apply to parental control and firewall
features. For example if you want to block your kids’ computers from the Internet at certain times, you can
create a schedule that specifies the day and time you want blocked, and then apply that schedule to a firewall
rule.
Click
New Entry
or the green + icon.
Enter a name for your rule.
Select either the time frame is going to be active or inactive.
Click to enter the time frame you want for the rule.
Click to save your rule.
Name:
Rule Activity Settings:
New Time Segment Entry:
OK:
Click
New Entry
or the green + icon under
Action
and the following screen will appear.
Page 80 / 95
80
DSL-2750B User Guide
Advanced Configuration
Before following the steps below, please factory reset the DSL-2750B. After it has booted up, disable the
Wireless by depressing the button on the back of the unit. Complete the following steps to set up Bridge
mode on the DSL-2750B:
1. Open a web browser and enter
.
2. Log in with the default user name (
admin
) and password (refer to back label of 2750B).
3. Select
My Network
>
Internet
.
4. From the drop-down menu next to
Connection type
, select
LAN-WAN Bridged Ethernet Connection
over ATM (Bridged ETHoA)
.
Bridge Mode
5. Click
Apply
.
6. When the following message appears, click
OK
.
19216811.live